Assessments - 4, GPA: 3.8
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Be careful not to misread the access indicator. Note If data cannot be read from or written to the memory card while the access indicator is lit, make sure the card is fully inserted into the slot. 12 Disconnecting the Reader/Writer From the Computer Notes • Do not disconnect the reader/writer from the computer while the access indicator is blinking. Doing so may cause damage to the data stored on the memory card. • Be sure to follow the steps described below. Sony accepts no responsibility for any damage or loss that results from disconnecting the reader/ writer without following the procedure described below. x For Windows The following explanation is illustrated with screens from Windows XP, and assumes that drive names E:, F:, G:, and H: are assigned to the four slots of the reader/writer. The screens may differ for other versions of Windows. 1 Click [Safely Remove Hardware] on the task tray, located at the lower right corner of the screen. Click this icon Task tray 2 Click [Safely remove USB Mass Storage Device - Drives (E:, F:, G:, H:)]. Click here 3 Make sure the message “The ‘USB Mass Storage Device’ device can now be safely removed from the system.” appears, and then disconnect the reader/writer. The ‘USB Mass Storage Device’ device can now be safely removed from the system. Note The above steps are not required when removing a memory card from the reader/writer. x For Macintosh 1 Close the files saved on the memory card, and exit any currently running applications. 2 Make sure the access indicator is not blinking. 3 Drag the removable disk icon to the [Trash]. Alternatively, select the removable disk icon, access the [File] menu on the menu bar, and select [Eject “Untitled”]*. * Depending on the memory card, a different label than “Untitled” may be shown. If no memory card is inserted into the reader/writer, skip this step. 4 Disconnect the reader/writer from the computer. Installing the Drive Letter Recognition Software (Windows Only) Before starting installation, read the “End User License Agreement.” 1 Download the installer file from the web site. The installer file (Sony_DLRS_RV1.01.exe) can be downloaded from the following URL 2 Close all programs that are still running. 3 Double click the installer file. (For windows Vista, User Account Control window will appear, click on [Allow].) 4 When the following window appears, the installing is completed, and click [OK]. Notes on Icons Once the Drive Letter Recognition Software is installed, the Removable Disk icons and their descriptions change. For example, if the computer has an A:, C:, and D: drive before connecting the reader/ writer, the drive letters will be assigned as follows when the reader/writer is connected: Computer drive name Corresponding memory card CF/Microdrive (E:) CompactFlash Microdrive SmartMedia (F:) SmartMedia xD-Picture Card Memory Stick (G:) “Memory Stick” media MMC/SD (H:) MultiMediaCard SD Memory Card Notes • The use of this software is intended only for this reader/writer. Other reader/writers may not work with this software. • Uninstall any similar software before installation to ensure that the software functions properly. About Memory Stick What is “Memory Stick”? “Memory Stick” is a compact-size IC recording medium with a large capacity. It has been designed not only for exchanging/ sharing digital data among “Memory Stick” compliant products, but also for serving as an insertable/removable external storage medium that can save data. Notes on “Memory Stick” On formatting (initialization) • If you format a medium in which data has been already written, all the data and software will be erased. Please be cautious not to mistakenly erase any important data. • Please make sure to format (initialize) a medium with the formatter of a “Memory Stick” compliant product. If it is initialized with Windows Explorer, a FORMAT ERROR occurs, and data on the medium can no longer be used by this product. About the size of “Memory Stick” • This product has a slot that can take both standard size and Duo size. All the products with such a slot as this are equipped with a system which automatically measures the size of an inserted medium. That’s why both standard-size “Memory Stick” and smaller “Memory Stick Duo” can be used on this product without any Memory Stick Duo Adaptor. • Do not insert multiple “Memory Sticks” at the same time. It might cause damage to the product. • When you use “Memory Stick Duo” on this product, please make sure to insert it in the right direction. • “Memory Stick Duo” should be kept away from small children to prevent them from accidentally swallowing it. • When you use “Memory Stick Micro” on this product, please make sure to attach the medium into M2 adaptor. If you attempt to insert “Memory Stick Micro” without attaching to M2 adaptor, there is a possibility that it cannot be pulled out. Usage Notes “Memory Stick” Media Notes on using “Memory Stick” media Terminal Write- P...