Assessments - 5, GPA: 4.4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• I/O cards that are not memory cards, such as GPS cards, are not supported. • MultiMediaCards and SD Memory Cards use the same slot, so you cannot use them at the same time. • The “Memory Stick” media all use the same slot, so you cannot use them at the same time. • Only DOS format is supported. Memory cards in other formats are not supported. Parts and Functions Front Rear A Access Indicator D USB Port (mini B) This indicator is always lit. The indicator Connect to a computer using the supplied blinks when the reader/writer accesses USB cable. data on a memory card. B MultiMediaCard/SD Memory Card Slot Insert either a MultiMediaCard or an SD Memory Card here. When inserting a microSD, microSDHC Card or an MMCmicro, use an adaptor ( not supplied ). C “Memory Stick” Slot Insert a “Memory Stick” media here. When inserting a “Memory Stick Micro” (“M2”), use an adaptor (not supplied ). 7 Connecting the Reader/Writer to a Computer Simply connect the reader/writer to a computer using the supplied USB cable. 1 Start the computer. 2 Connect the smaller connector of the USB cable to the USB port on the rear of the reader/writer. 3 Connect the larger connector of the USB cable to the USB port on the computer. The computer recognizes the reader/ writer as a removable disk, and the reader/writer is ready for use. Notes • Do not connect to a computer via a USB hub. • Depending on the computer and the status of its operating system, the reader/writer may not operate or may become unstable. If this occurs, refer to the “Troubleshooting” section. • After disconnecting the USB cable, wait at least 5 seconds before reconnecting it. (Otherwise, the reader/writer may not be recognized.) • When two or more USB devices are connected to one computer, the reader/writer is not guaranteed to operate simultaneously with some types of USB device. • You cannot access two or more memory cards simultaneously on a single computer by connecting additional memory card devices. Remove any memory cards from the reader/ writer or turn off the other devices. x For Windows • On some computers, a message may appear asking you to insert the operating system disc. When this happens, follow the computer’s instructions. • On some computers, the “HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub” message may appear, indicating that a hi-speed USB device has been connected to a USB port which does not support hispeed USB. If your computer has multiple USB ports, try connecting to a different port. Otherwise, close the message and continue using the reader/writer with the current port. • Follow the steps below to turn off the write cache setting for removable disk drives. Leaving this setting on may cause the reader/ writer to malfunction. – On Windows 7: Open the following items in the following order: [Start] button- [Control Panel] - [System and Security] - [Device Manager] (Click on the Device Manager link located under the System heading) [ Disk drives] - [Sony Card_R/W -MS USB Device]. On the [Policies] tab in the properties dialog box that appears, make sure that [Quick removal (default)] is selected. In the same way, select [Quick removal (default)] on the policies] tab of the [Sony Card_R/W -SD USB Device]. – On Windows Vista: Open the following items in the following order: [Start] button - [Control Panel] - [System and Maintenance] - [Device Manager] button (When clicking on [Device Manager] button, the User Account Control window will appear, click on [Continued]) - [Disk drives] - [Sony Card_R/W -MS USB Device]. On the [Policies] tab in the properties dialog box that appears, make sure that [Optimize for quick removal] is selected. In the same way, select [Optimize for quick removal] on the [Policies] tab of the [Sony Card_R/W -SD USB Device]. – On Windows XP: Open the following items in the following order: [Start] button – [Control Panel] – [Performance and Maintenance] – [System] – [Hardware] tab – [Device Manager] button – [Disk drives] – [Sony Card_R/W -MS USB Device]. On the [Policies] tab in the properties dialog box that appears, make sure that [Optimize for quick removal] is selected. In the same way, select [Optimize for quick removal] on the [Policies] tab of the [Sony Card_R/W -SD USB Device]. – On Windows 2000: Open the following items in the following order: [Start] button – [Settings] – [Control Panel] – [System] – [Hardware] tab – [Device Manager] button – [Disk drives] – [Sony Card_R/ W -MS USB Device]. On the [Disk Properties] tab in the properties dialog box that appears, make sure the [Write Cache enabled] check box is not selected. In the same way, clear the [Write Cache enabled] check box on the [Disk Properties] tab of the [Sony Card_R/W -SD USB Device]. – On Windows Me: Open the following items in the following order: [Start] button – [Settings] – [Control Panel] – [System] – [Performance] tab – [File System] button. On the [Removable Disk] tab in the properties dialog box that appears, make sure the [Enable wri...