Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
7 PD6920_C010703.p65 7 7/1/2003, 17:22 PLAYING COMPACT DISCS NOTE: Although this portable CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R and CD-RW discs may be effected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. NORMAL PLAYBACK 1.) Move the FUNCTION selector to the CD position. 2.) OpentheCDdoorbyliftingatitscenterposition.Ifyouhavenotalreadyremoved the white transit card from the CD player, please remove it now. 3.) Place your CD on the center spindle with the printed label side facing up. Close the CD door. The player will read the Table of Contents and the display will show the total number of tracks on the disc. If the disc is damaged or up side down, display shows “––” 4.) Press the CD PLAY/PAUSE button to begin playback on Track 1. The PLAY Indicator appears in the display . • To skip to higher or lower numbered tracks during playback press the FWD or REV button repeatedly until the desired track number appears in the display. Playback will begin on the selected track. • To search rapidly forward or backward during playback to locate a specific portion of a track, depress and hold the FWD or REV button. The player will search rapidly forward or backward as long as the buttons are depressed. Normal speed playback will resume when the buttons are released. • To Pause momentarily during playback press the PLAY/PAUSE button again. The sound stops and the PLAY Indicator flashes, however the disc continues to spin. To cancel Pause and resume normal playback press the PLAY/PAUSE button once more. Normal playback resumes and the PLAY Indicator stops flashing. 5.) Adjust the VOLUME control as desired. 8 PD6920_C010703.p65 8 7/1/2003, 17:22 6.) To Stop playback at any time press the CD STOP button. The disc stops and the display again shows the total number of tracks on the disc. After the last track has played the disc stops automatically and the display again shows the total number of tracks on the disc. 7.) Open the CD door, remove your disc, and close the CD door again. 8.) Move the FUNCTION selector to the OFF position to shut the power ‘Off’. TO START PLAYBACK FROM A SPECIFIC TRACK Insert your disc in the player, close the door, and wait until the display shows the total tracks. Press either the or button until the desired track number appears in the display, then press the PLAY/PAUSE button to begin playback on that track. REPEAT PLAYBACK You can program the player to repeat either a single track or all tracks on the disc continuously. The Repeat feature can be activated while the disc is playing or while the disc is stopped. One Track Repeat Press the REPEAT button once. The REPEAT Indicator appears. Select the track you wish to repeat with the or buttons and then press the PLAY/PAUSE button. The selected track will be repeated continuously. To cancel One Track Repeat press the STOP button once. ALL Tracks Repeat Press the REPEAT button twice. The REPEAT ALL Indicator appears. Press the PLAY/PAUSE button to begin playback. The entire disc will be repeated continuously. To cancel All Tracks Repeat press the STOP button once. 9 PD6920_C010703.p65 9 7/1/2003, 17:22 PROGRAMMED PLAYBACK You can program up to 19 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program. Note: The player cannot be programmed while a disc is playing. If a disc is playing press the STOP button to stop playback before you begin the programming steps below. 1.) Move the FUNCTION selector to CD, insert your disc in the player, close the door, and wait until the total track number appears in the display. 2.) Press the CD PROGRAM button once. The PROGRAM Indicator and program memory “00” begin flashing in the display. 3.) Use the / buttons to select the first track to be programmed. (Example: Track 08). 4.) When track number “08”flashes in the display, press the PROGRAM button once again to enter the track “08”in program memory number “01”. Track number “08”disappears and “00”flashes again in the display, indicating that you may now select a track to be entered in program memory number “02”. 5.) Use the or buttons to select the next track to be programmed. When the desired track number appears in the display press the PROGRAM button again to enter that track in the program memory. 6.) Repeat Step 5 until you have entered up to 19 tracks in the program memory. When the memory is full, the “––”flashes in the LCD display 7.) To begin programmed playback press the PLAY/ PAUSE button. The LCD display will show the first programmed track and playback will begin on that track. The PROGRAM Indicator flashes. 10 PD6920_C010703.p65 10 7/1/2003, 17:22 After the last programmed track has played the player stops but the programmed tracks remain in ...
Este manual também é adequado para os modelos :CD-players - SB261 (591.6 kb)