Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
If you have not already removed the white transit card from the CD player, please remove it now. 4.) Place your CD on the center spindle with the printed label side facing up. Make sure the CD is seated properly. Close the CD door. The player will read the Table of Contents and the display will show the total number of tracks on the disc. If the disc is damaged or up side down, display will show “ – – ”. FM STEREO PLAY/PAUSE PROGRAM REPEAT FM STEREO PLAY/PAUSE PROGRAM REPEAT MS7616R_061404.p65 13 14/6/2004, 10:38 5.) Press the PLAY/PAUSE button to begin playback on Track 1. The PLAY/PAUSE indicator lights up. 6.) Adjust the VOLUME control as desired. 7.) Playback will continue until the end of the disc. When the disc ends the display again shows the total number of tracks on the disc. You may also stop playback at any time by pressing the STOP button. PAUSE Control To pause momentarily during playback press the PLAY/PAUSE button again. FM STEREO PLAY/PAUSE PROGRAM REPEAT Playback stops but the disc continues to spin and the PLAY/PAUSE indicator flashes. FM STEREO PLAY/PAUSE PROGRAM REPEAT Press the PLAY/PAUSE button once more to cancel Pause and resume playback. The PLAY/PAUSE indicator stops flashing. Skipping Tracks and High Speed Music Search During CD Playback, repeatedly press the SKIP FWD or SKIP REV buttons to skip to higher or lower number tracks. When the desired track number appears on the display release the buttons and playback will begin on the desired track. To rapidly search forward or back within a track to locate a specific musical passage, depress and hold either the / buttons on main unit, or / buttons on remote control. The player will move forward or backward at high speed as long as the buttons are depressed. When you hear the desired passage release the buttons. Normal playback will resume at that point. 14 MS7616R_061404.p65 14 14/6/2004, 10:38 REPEAT Playback This feature allows you to continuously repeat a single track or the entire disc. To Repeat A Single Track PROGRAM FM STEREO Press the REPEAT button once. The REPEAT indicator PLAY/PAUSE REPEAT flashes. Press the or buttons to select the desired track. Press the PLAY/PAUSE button to begin Repeat Playback of the selected track. To Repeat The Entire Disc Press the REPEAT button twice. The REPEAT indicator remains ‘on’. FM STEREO PLAY/PAUSE PROGRAM REPEAT Press the PLAY/PAUSE button to begin Repeat Playback of the entire disc. To cancel Repeat Playback press the REPEAT button until the REPEAT Indicator goes ‘off’. Repeat Playback is also canceled by pressing the STOP button, or setting to the TUNER position. 15 MS7616R_061404.p65 15 14/6/2004, 10:38 PROGRAMMED Playback This feature allows you to program up to 20 tracks on a disc for playback in any desired order. Note: You cannot program tracks while a disc is playing. If the disc is playing press the STOP button first before beginning the programming steps below: PROGRAM FM STEREO 1.) Press the PROGRAM button to enter the Program Mode. The PROGRAM indicator and Program PLAY/PAUSE REPEAT Number ‘0’ flash. 2.) Press the SKIP or buttons to select the first PROGRAM FM STEREO track number you wish to enter in the program PLAY/PAUSE REPEAT memory. Example: Track Number 8. 3.) When the desired track number appears on the PROGRAM FM STEREO display, press the PROGRAM button again to enter that track in memory. PLAY/PAUSE REPEAT The Program Number display returns to flashing “0”. 4.) Repeat Steps 2-3, selecting a different track number each time until you have entered up to 20 tracks in the program memory. Note: You may program the same track number to FM STEREO PROGRAM play multiple times in the program sequence if PLAY/PAUSE REPEAT desired. When programmed track is full, “ – – ” flashes in the display. 5.) Press the PLAY/PAUSE button to begin FM STEREO PROGRAM Programmed Playback. The PROGRAM indicator PLAY/PAUSE REPEAT flashes. Playback will begin with the first track you programmed and will continue until the last programmed track has played. 16 MS7616R_061404.p65 16 14/6/2004, 10:38 6.) After the last track has played the player stops and the display shows the total number of tracks on the disc. However the program sequence remains in the memory. Press the PROGRAM button, then the PLAY/PAUSE button to play the programmed sequence again. 7.) To cancel the programmed sequence from the memory press the STOP button while in programming mode. The programmed sequence may also be canceled by removing the disc, changing function to TUNER , or shutting the system ‘off’. Program Repeat Playback You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks. First, program the desired tracks according to Steps 1 through 5 on page 16. When Programmed Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature. PROGRAM FM STEREO The REPEAT Indicator lights and all the tracks in your PLAY/PAUSE REPEAT programmed sequence will ...