Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
LOADING DISCS LOADING AND UNLOADING COMPACT DISCS • Set the FUNCTION Selector to the CD position. • Open the disc compartment. • Once the CD cover has opened, remove a disc from its case and place it carefully in one of the indentations in the compartment with the label side facing up. Smaller, 3” discs, may also be used with this CD player. • To load additional CD's press the DISC button to rotate the CD tray. Up to 3 discs can be placed in the tray at any one time. Smaller 3 inch discs can be used in this unit. • Close the disc compartment. • The unit will go through a cycle to find the first CD there is in the tray. This may take up to 15 seconds. • The disc compartment may be opened at any time. CAUTION • Do not put anything except a compact disc into the compartment. Foreign objects can damage the mechanism. • Do not force the compartment by hand during the opening and closing operations. • Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism. SUPER BASS To enhance Bass effect to the desired level using the Bass Control Button. PLAYING DISCS • Open the disc compartment, and load a CD. • Close the disc compartment and the unit will search for the first tray to contain a CD and the display will show the total playing time of the CD. • Press the CD DISC Button to select the CD of your choice. • Press the PLAY/PAUSE Button and disc play will begin from the beginning of the first track. A particular track can be selected by pressing the ..& ..Buttons. If this is done before pressing the PLAY/PAUSE Button, disc play will start with the selected track when the PLAY/PAUSE Button is pressed. • At the end of the disc, the unit will switch to stop mode - 8 Notes: If the disc is deeply scratched, or too dirty, disc play may not start. If an improperly centered disc is played, noise can be heard in the mechanism. The use of such discs should be avoided. IMPORTANT INFORMATION This compact disc player has built-in error compensation circuits to correct minor defects in a disc. There are limits, however, to the amount of corrections available. In some cases, the CD player may skip some tracks on a disc during disc play. This problem may be caused by defects (such as scratches) in the disc being played which are too large for the error compensation circuits to handle. If you encounter this problem, check the CD player's operation as follows, before having the unit serviced. Play a new disc. If the CD player operates normally, the skipping problem is probably due to a defective disc. TO STOP A CD PART WAY THROUGH • Press the STOP Button. Disc play will stop, the display will show the total number of tracks and the total playing time of the CD. • To temporarily stop disc play (pause mode), press the PLAY/PAUSE Button. Disc play will pause at the current play position. • To resume disc play, press the PLAY/PAUSE Button again. The Play indicator will be displayed. TRACK SKIP TO SKIP TO THE NEXT TRACK ON A DISC • For example, to skip ahead to the beginning of track 5 while track 4 is playing: • Press the ..Button once. Disc play will resume at the beginning of track 5. The CD player will skip ahead to the next track each time the ..Button is pressed. Repeatedly pressing the Forward Skip Track Button makes the CD player skip ahead through the disc track by track. Once the beginning of the last track is reached the CD player will not advance any further. TO SKIP BACK TO THE PREVIOUS TRACK ON A DISC • For example to skip back to the beginning of track 3 while track 4 is playing: • Press the ..Button twice. Disc play will resume at the beginning of track 3. The CD player will skip back one track each time the ..Button is pressed. If this Button is pressed once in the middle of a track, the CD player will skip back to the beginning of that track. To make it skip back to the previous track press the • Button twice. Repeatedly pressing the ..Button makes the CD player skip back through the disc track by track. Once the beginning of the first track is reached, the CD player will not go back any further. - 9 Notes: The ..& ..Buttons can be used to select a desired track to play before disc play starts. In this case the number of the selected track will be displayed until the Play/Pause Button is pressed. DISC SKIP • To skip to the next disc simply press the DISC SKIP Button. The unit will cycle through position 1 - 2 - 3 - 1 - 2 . . . . . .etc REPEAT DISC PLAY If the REPEAT Button is pressed during normal or programmed disc play the following repeat functions are displayed in sequence in the CD Display. REPEAT ALL DISC Repeats All the Tracks on All the Discs REPEAT 1 DISC Repeats all the tracks on the Current disc. REPEAT 1 Repeats the current track on the Current disc. To cancel a repeat mode, keep pressing the REPEAT Button until the REPEAT Indicator disappears. PROGRAMMED DISC PLAY It is not possible to enter programs during disc play. Press the STOP Button first, then follow the i...