Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
1 Insert tapes into deck 1 and deck 2. 2 Press the TAPE/DECKl/2 button to select the deck to be played back first. 3 Press the REV MODE button to select 1]. 4 Press the 4 F button to start playback. Playback continues until the n button is pressed. About cassette tapes To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool. \ Type II tape Tab for side A detection >ti slot / To record on the tape again, cover the tab openings with adhesive tape, etc. (On l-ype 11tapes, take care not to cover the Type II tape detection slot.) 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recol’nmended. Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break cxjam in the mechanism. DOLBY NR system The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system. ENGLISH 14 .> BASIC RECORDING This section explains how to record from the tuner, CD player, or external equipment. Preparation Set the tape to the point where recording will start. Use Type I (normal) and Type II (high/CrOz) tapes for recording. 1 Insert the tape to be recorded on into deck 2. Insert the tape with the side to be recorded onfirst facing out from the unit. 2 Press the REV MODE button to select the reverse mode. To record on one side onry, select =. To record on both sides, select Z> or C=). 3 Press the DOLBY NR button to turn Dolby NR on \ or off. ‘ To record with DOLBY NR, tury on qU NR. To record without DOLBY NR, turn off Do NR. 4 Press one of the function buttons and prepare the source to be. recorded. ‘To record from a CD, press the CD button and load the disc(s). To record from a radio broadcast, press the TUNER button and tune in to a station. To record from the connected source, press the VIDEO/ AUX or MD buttpn and play. 5 Press the ~ REC/REC MUTE button to start recording. @ When the selected function is C,D, playback and recording start simultaneously. To stop recording, press the n button. To pause recording, press the II button. (Applicable when the source is TUNER, VI DEO/AUX or MD.) To resume recording, press again. INSERTING BLANK SPACES Insertion of 4-second blank spaces enables you to activate the Music Sensor function. (Applicable when the source is TUNER, VIDEO/AUX or MD) 1 Press the l REC/REC MUTE buiton during recording or while in recording pause mode. ~ on the display flashes for 4 seconds and the tape runs without recording. After 4 seconds, the deck enters the recording pause mode. 2 Press the 11 button to resume recording. To insert a blank space of less than 4 seconds, press the l REC/REC MUTE button again while ~ is flashing. To insert blank spaces of more than 4 seconds, after the deck enters recording pause mode, press the l REC/REC MUTE button again. Each time the button is pressed, a 4-second blank space is added. To erase a recording Make sure the microphone is not connected to this unit. 1 Insert the tape to be erased into deck 2 and press the TAPE/ ~ DECK 1/2 button to display “TP 2. 2 Set the tape to the point where the erasure is to be started. 3 Set the reverse mode by pressing the REV MODE button. 4 Press the l REC/REC MUTE button to start the-erasure. 15 ENGLISH DUBBING A TAPE MANUALLY DUBBING THE WHOLE TAPE 1,4 3 2 2 5 Em3 Set the tape to the point where recording will start. . The reverse mode is automatically set to 1. Note that recording will be done on one side of the tape only 1 Press the TAPE button. 2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2. Insert the tapes with the sides to be played back or recorded on facing out from the unit. 3 Press the DOLBY NR button to turn off the Dolby NR. 00 NR on the display goes out. 4 Press the TAPE/DECK 1/2 button to select deck 1. “TP 1“ is displayed. 5 Press the l REC/REC MUTE button to start recording. Playing and recording start simultaneously. To stop dubbing Press the H button, To set the Dolby NR when playing back the dubbed tape Press the DOLBY NR button and turn Dolby NR on or off to match the original tape. 1 2 This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start simultaneously as soon as the longer tape has been reversed. m Dubbing does not start from a point halfway in the tape. l The reverse mode is automatically (jet to 11. The Dolby NR does not affect recording. 1 Press the TAPE buttcm. 2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2. Insert each tape with the side to be played back or recorded on first facing out from the unit. 3 Press the SYNC DUB Ibutton once or twice to start recording. 6) For recording at normal speed, press it once to display NORM-DUB. @) For recording at highl speed, press it twice to display HIGH-DUB, o @ The tapes are rewound t...