Assessments - 3, GPA: 4.3
(
)
)
|
Fotos e especificações American Audio MCD-710 |
Facilidade de uso
(This will enable the Fader “Q” Start function - See “Q” start control page 7). 4) Connect the supplied D-Plug control cables from the transport unit to the controlling unit. Be sure to transport drive one is connected to controlling unit one and transport drive two is connected to controlling drive two. CAUTION: • Be sure to use the supplied mono 1/8" control cables. Using other types of cable may result in unit damage • To avoid sever damage to the unit, be sure the power is off when making connections to the unit. Installation Note: The player will work normally when the main unit is mounted with the front panel within 15 degrees of the vertical plane If the unit is tilted excessively, discs may not be loaded or unloaded properly. (Figure 1) Figure 1 ©American Audio® --MCD-710™ Instruction Manual Page 8 GENERAL FUNCTIONS AND CONTROLS A. CONTROLLER UNIT ( FIGURE 3) 1. JOG WHEEL - This wheel has three functions; A. The wheel works as a pitch bend during Playback. Turning the wheel clockwise can increase the pitch percentage up to 100%, and turning the wheel in the counter-clockwise direction can decrease the pitch percentage down to -100%. The pitch bend will be determined on how long you turn the jog wheel continuously. B. The jog wheel will also control the scratch effect, when the scratch effect is active. C. The jog wheel is also used to edit your seamless loop. See page 19 for more details. 2. VFD DISPLAY - This high quality VFD display indicates all the functions, as they are occurring. This display is viewable at several comfortable angles (see page 8). The display ICONS will be explained on page 14. 3. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. The slider is a set adjustment and will remain set until the pitch slider is moved or the pitch function has been turned off. This adjustment can be made with or without a disc in the drive. The pitch adjustment will remain even if a disc has been remove and will reflect on any other disc loaded into the player. That is to say, if you set a +2% pitch on one disc, remove that disc and insert another, that disc too will have a +2% pitch. The amount of pitch being applied will be displayed in the VFD (2). ©American Audio® - - MCD-710™ Instruction Manual Page 9 Figure 3 Figure 2 1 2 3 4 5 6 7 8 9 10 21 19 18 17 16 15 14 13 12 11 24 23 22 20 GENERAL FUNCTIONS AND CONTROLS (Cont.) GENERAL FUNCTIONS AND CONTROLS (Cont.) SEARCH KNOB -The search function has four forward and four reverse speed positions allowing you to quickly scan through tracks. The more you turn the wheel in either direction, the faster your search. 5. TRACK/FOLDER KNOB -This knob is used to scroll backward and forward through tracks. Pushing this knob and turning it at the same time will let you scroll through the folders found on a Mp3 disc. Also, when you press it once it will toggle between the track name and the album name on an Mp3 disc. 6. FOLDER L.E.D. -This L.E.D. indicates that the FOLDER BUTTON is activated. 7. SGL/CTN - This function allows you to choose between single track play or continuous track play (all tracks in order). This function also operates in FLIP FLOP mode. This button will also allow you to turn the Auto Cue function on and off. See page 14 for this function. 8. TIME BUTTON -The TIME button will switch the time value described in the TIME METER between ELAPSED PLAYING TIME, and TRACK REMAINING TIME. This button will also allow you to enter the firmware, sleep mode, and Memory clear menus. See page 20 for this menu function. 9. BOP BUTTON -During play mode, pressing the BOP button will instantly return play to the last set cue point without interruption of music. 10. PITCH ON/OFF BUTTON -This button is used to turn the PITCH SLIDER (3) function on and off. This button will also change the pitch percentage the PITCH SLIDER (3) will react to. The pitch percentage can be changed between 4%, 8%, and 16%. It can also be changed to 100%, but only when a cd is loaded, not an Mp3 disc. 4% will allow the least amount of pitch manipulation and 16% or 100% (depending on the type of disc loaded) will allow the most amount of pitch manipulation. To adjust to the different values please see page 23. Note when the button L.E.D. is not glowing the Pitch Function is not activated. 11. PITCH PERCENTAGE SELECTOR-Choose from pitch percentages of 4%, 8%, 16%, and 100%. See page 23 for more details. 12. TEMPO LOCK FUNCTION -This button activates the TEMPO LOCK function. This function allows you to use the PITCH SLIDER to speed up or slow down playback speed without altering the tonal pitch of the track. When this function is not engaged the original tonal pitch of the track will be altered giving you the "chipmunk" effect when a track is played at a high rate of speed, or the "James Earl Jones" effect when a track is slowed to much. To turn this function off, press and hold down this button for at least 1 second and t...