Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Root folder The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs. 13-EN Sound Setting Sound Setting Rotary encoder (AUDIO/LOUD) /ESC SOURCE/ BAND A. SEL Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat 1 Press Rotary encoder (AUDIO) repeatedly to choose the desired mode. Each press changes the mode as follows: SUBWOOFER*1 BASS TREBLE BALANCE FADER DEFEAT VOLUME SUBWOOFER Subwoofer: 0 ~ +15 Bass level: –7 ~ +7 Treble level: –7 ~ +7 Balance: L15 ~ R15 Fader: R15 ~ F15 Defeat: ON/OFF Volume: 0 ~ 35 • If no operation is performed for 5 seconds after selecting the SUBWOOFER, BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode. *1 When the subwoofer mode is set to OFF, its level cannot be adjusted. 2 Turn the Rotary encoder (AUDIO) until the desired sound is obtained in each mode. By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults. • Depending on the connected devices, some functions and display indications do not work. Setting the Bass Control You can change the Bass Frequency emphasis to create your own tonal preference. 1 Press A.SEL to select the BASS (Bass Center Frequency) control mode. BASS TREBLE HPF BASS Setting the Bass Center Frequency 2-1 Press BAND to select the desired bass center frequency. 80 Hz 100 Hz 200 Hz 60 Hz 80 Hz Emphasizes the displayed bass frequency ranges. Setting the Bass Bandwidth 2-2 Press SOURCE/ to select the desired bass bandwidth. 12 34 Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency. Setting the Bass Level 2-3*Turn the Rotary encoder to select the desired bass level (–7~+7). You can emphasize or weaken the bass level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). • Depending on the connected devices, some functions and display indications do not work. However, Bass Level is still adjustable if an audio processor with the Bass function is connected. • The function is inoperable when DEFEAT is set to ON. * The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 14). 14-EN Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. 1 Press A.SEL to select the TREBLE (Treble Center Frequency) control mode. BASS TREBLE HPF BASS Setting the Treble Center Frequency 2-1 Press BAND to select the desired treble center frequency. 10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz Emphasizes the displayed treble frequency ranges. Setting the Treble Level 2-2*Turn the Rotary encoder to select the desired treble level (–7~+7). You can emphasize or weaken the treble level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). • Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected. • The function is inoperable when DEFEAT is set to ON. * The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 14). Adjusting the High Pass Filter The High Pass Filter on this unit can be adjusted to suit your personal taste. 1 Press A.SEL to select the HPF (High Pass Filter) mode. BASS TREBLE HPF BASS 2 Turn the Rotary encoder to select the HPF frequency. OFF 80 Hz 120 Hz 160 Hz 3 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • The function is inoperable when DEFEAT is set to ON. • When an external audio processor is connected, this setting cannot be made. Turning Loudness On/Off Loudness introduces a special low-and high-frequency emphasis at low listening levels. This compensates for the ear’s decreased sensitivity to bass and treble sound. Press a...