Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
• If you set the 2WAY/3WAY switch (page 38) to 3WAY, you cannot adjust the FADER mode on the CDA-9815/CDA-9813. *1 When the subwoofer mode is set to OFF, its level and phase cannot be adjusted. 2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting Defeat ON, previously adjusted settings of BASS, TREBLE and EQ will return to the factory defaults and MX is turned off. • Depending on the connected devices, some functions and display indications do not work. • When you press DISP/B.OUT, you can switch the Level Indicator display to the AUDIO Adjustment display on the CDA-9815/CDA9813 only. For details, see "Changing the Audio Level Display Pattern" (page 7). Setting the Bass Control (CDA-9811 only) You can change the bass frequency emphasis to create your own tonal preference. 1 Press CENTER f to select the Bass (bass center frequency) Control mode. BASS > TREBLE > normal mode > BASS 2-1*2 Setting the bass center frequency: Press g or f to select the desired bass center frequency. 60Hz - 70Hz - 80Hz - 90Hz - 100Hz - 130Hz - 150Hz - 200Hz - 60Hz The displayed bass frequency is emphasized . 2-2*2 Setting the bass band width (Q-Factor): Press BAND/TEL. to select the desired bass band width. > B. Width1 > B. Width2> B. Width3 > B. Width4 (Narrow)< >(Wide)...................................... Changes the boosted bass band width to wide or narrow. A wide setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency. 2-3 Setting the bass level: Turn the Rotary encoder to select the desired bass level (–7~+7). You can emphasize or weaken the bass frequency. • If no buttons are pressed within 15 seconds, the bass control setting will be turned off automatically. • The bass level settings will be individually memorized for each source (FM, AM, XM, CD, etc.) until the setting is changed. The bass frequency and bass band width settings adjusted for one source are effective for all other sources (FM, AM, XM, CD etc.). • Depending on the connected devices, some functions and display indications do not work. However, bass level is still adjustable if an audio processor with the bass adjustment is connected. • This function is inoperable when DEFEAT is set to ON. *2 Selecting any of the "Setting the Bass Type" (TYPE 1 through 3), temporarily replaces the custom settings you have made above. Setting the Treble Control (CDA-9811 only) You can change the Treble Frequency emphasis to create your own tonal preference. 1 Press CENTER f to select the Treble (treble center frequency) Control mode. BASS > TREBLE > normal mode > BASS 2-1 Setting the treble Center frequency: Press g or f to select the desired treble center frequency. 10.0kHz - 12.5kHz - 15.0kHz - 17.5kHz - 10.0kHz The displayed Treble frequency is emphasized. 2-2 Setting the treble level: Turn the Rotary encoder to select the desired treble level (–7~+7). You can emphasize the treble frequency. • If no buttons are pressed within 15 seconds, the treble control setting will be turned off automatically. • The treble level settings will be individually memorized for each source (FM, AM, XM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, XM, CD, etc.). • Depending on the connected devices, some functions and display indications do not work. However, treble level is still adjustable if an audio processor with the treble adjustment is connected. • This function is inoperable when DEFEAT is set to ON. 13-EN Setting the Bass Type (CDA-9811 only) This function allows for 3 different bass type settings. Select the one that appeals to you the most. 1 Press and hold CENTER f for at least 2 seconds to set the bass type. 2 Press g or f within 15 seconds to select the desired type (1 through 3). TYPE 1 will sound best if you have a subwoofer in your system. Use TYPE 2 or 3 if you are using small diameter speakers. 3 Press and hold CENTER f for at least 2 seconds to return to normal mode. • Bass center frequency and bass band width previously set are replaced when selecting TYPE 1 through 3. When bass type is set to OFF, your previous settings are restored. • Bass type is not selectable when connected to an external audio processor. Adjusting the built-in Crossover (CDA-9811 only) The High and Low Pass Filters on this unit can be adjusted to suit your personal taste. 1 Press and hold T.CORR/X-OVER for at least 2 seconds. HPF -
CD-players - CDA-9815 (1.05 mb)
CD-players - CDA-9811 (1.05 mb)