Assessments - , GPA:
(
)
)
Fabricante : Gemini
Arquivo Tamanho: 423.05 kb
Arquivo Nome : 977a8a38-2471-4f96-9a22-5e405f1604a8.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
The 8% button will assign +/- 8% to the PITCH CONTROL SLIDE (27). The 16% button will assign +/- 16% to the PITCH CONTROL SLIDE (27). The PITCH (25) button must be ON for the VPS (28) to work. (5) OPERATING INSTRUCTIONS: 1. Make sure that the VOLTAGE SELECTOR SWITCH (1), found on the rear panel, is set for the proper voltage. Plug the unit in and press the POWER (6) switch. The unit is ON. Pushing POWER (6) a second time turns the unit OFF. 2. Press OPEN/CLOSE (8) and place a CD in the DISC TRAY (7). Press OPEN/ CLOSE (8) again. The tray will close. 3. Push TRACK SEARCH (14) to select the track you wish to play. 4. Press PLAY/PAUSE (11) and the unit will instantly play. ORDER OF READING FOR MP3 FILES: All MP3 files must have the extension *.mp3. If there are no files with *.mp3 extensions or MPX-3 cannot read the file system correctly the CD player will indicate NO DISK and the MP3 segment in the right corner of LCD display will blink. If a file has no *.mp3 extension, it will be skipped, during the file system reading. (See w.wna and r.jpg files in the diagram). UDF format is not supported. For MP3 files with adaptive bit-rates, the ELAPSED and REMAIN time indication may be inaccurate. The MPX-3 will only play the first session of tracks on a CD that has been recorded in a MULTISESSION or MIXED mode. ROBO START INSTRUCTIONS: IN SINGLE-AUTO CUE MODE: Use ROBO START (29) in SINGLE AUTO CUE mode to alternate play between the MPX-3s two sides (one track from one side, then one from the other). In SINGLE AUTO CUE mode play starts immediately with no blank or “dead” space. ROBO START (29) causes one side of the CD player to play when the other side is paused. 1. Engage SINGLE AUTO CUE mode with the SINGLE AUTO CUE/CONTINUOUS (17) button. 2. Press the ROBO START (29) button to activate ROBO START (29). Play will alternate between the two CD players. At the end of a track, the playing side pauses and the other CD deck plays a track. At the end of this track, the playing side pauses and the first CD deck resumes play. IN CONTINUOUS MODE OR DURING NORMAL PLAY: If you use the ROBO START (29) function without SINGLE AUTO CUE MODE (in CONTINUOUS MODE or during normal play), CD deck play does not alternate automatically. The PLAY/PAUSE (11) button must be pressed on the playing deck for the second deck to play. FILE/FOLDER SAMPLE DIAGRAM: 3Æ (5) b.mp3