Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
This state of the art professional CD player is backed by a three year warranty, excluding lasers. One year warranty on CD lasers. Prior to use, we suggest that you carefully read all the instructions. 1 Seamless Looping & Instant Reverse Anti-Shock Using RAM Buffer Memory Large Soft Touch Rubber Jog Wheel LED Target Light for Draw Mechanism FEATURES: • 5 Hot Cue Points & BOP Feature • Real Time Scratching • Auto BPM Within LCD Display • Fully Adjustable Brake & Start • Variable Pitch Control (4%, 12%, 24%, & 100%) • 5 DSP Effects With Time & Ratio Parameter Control • New “State of the Art” Master Tempo With, Fully Functional Pitch • Large LCD Screen with Blue LED Backlight & Dimmer Control • Direct Access Keypad with Full Programmable Feature SAFETY CERTIFICATIONS Laser Diode Properties Material: Ga - Al - As Wavelength: 755 - 815 nm (25° C) Laser Output: Continuous Wave, max. 0.5mW CAUTIONS: Do not use this CD Player at temperatures below 41°F/5°C or higher than 95°F/35°C. The apparatus should not be exposed to dripping or splashing and no objects filled with liquids such as vases should be placed on the apparatus. Place the unit in a clean and dry location. Do not place the unit in an unstable location. When disconnecting the power cord from an AC outlet, always grasp it by the plug. Never pull the power cord. To prevent electric shock, do not remove the cover or the bottom screws. There are no user serviceable parts inside. Please refer servicing to a qualified technician. Do not use chemical solvents to clean the unit. Keep the laser pickup clean by keeping the drawer closed. Keep this manual in a safe place for future reference. IMPORTANT NOTE: Since the CFX-50 is a dual CD player, most of the functions and controls are duplicated on both sides of the CD player. To eliminate confusion and to make the drawings easier to understand, we will only number the left side functions and controls. LINE VOLTAGE SELECTION: Model CFX-50 is a dual voltage unit. It will operate at 115 or 230 volts. To set the proper voltage, follow these steps: 1. Place the head of a screwdriver in the center of the VOLTAGE SELECTOR SWITCH (1) found on the rear panel. FUNCTION DESCRIPTIONS: ANTI-SHOCK BUFFER MEMORY: With 12 SECONDS OF ANTISHOCK BUFFER MEMORY, each side of the CD player stores 6 seconds of future play to ensure that any harsh movement or bumping of the unit will not interrupt play and play will continue smoothly. NOTE: REFER TO CONNECTION SECTION FOR REMOTE CONTROL (3) & LINE OUTPUT JACKS (4). POWER: After making sure that the VOLTAGE SELECTOR (1) switch, found on the rear panel, is properly set, plug the unit in and press the POWER (6) button. The unit will turn on. Pushing the POWER button (6) a second time will turn the unit off. DISC TRAY: The DISC TRAY (7) is where the CD is held during loading, unloading and playback. Pressing the disc trays STOP (8) button, will open or close the tray. The DISC TRAY (7) holds both 12 cm and 8 cm CDs. Please note, if the CFX-50 is in play mode, the tray will not open. NOTE: DO NOT FORCE THE DISC TRAY (7), EXCESSIVE FORCE MAY DAMAGE THE CD MECHANISM. STOP: Press the STOP (8) button to STOP a CD in PLAY mode and to also load or remove a CD from the DISC TRAY (7). NOTE: THE STOP (8) BUTTON ONLY FUNCTIONS AS STOP AND EJECT ON THE REMOTE CONTROL. DIMMER: Turn the DIMMER (9) to the right to increase brightness of the DISPLAY (10), and push it in to lock the setting. DISPLAY: The DISPLAY (10) shows the track number, pitch value, singleauto cue, continue (for continuous play), and 3 different time displays. These time displays are time elapsed on the track, time remaining on the disc and time remaining on the track. Time is measured in minutes, seconds and frames. It also shows the beats-per-minute of the track. PLAYBACK DISPLAY BAR: The PLAYBACK DISPLAY BAR (11) displays the elapsed and remaining time for each track. The display flashes slowly when the track has 15 seconds remaining and pulses rapidly when playing time is down to 5 seconds. PLAY/PAUSE HI: Each press of the PLAY/PAUSE BUTTON (12) causes the operation to change from play to pause or from pause back to play. CUE/PREVIEW: With the unit in the PLAY mode and after the CUE POINT has been programmed, pressing CUE/PREVIEW (13) will cause the CD player to enter the PAUSE mode at the programmed CUE POINT. Holding down the CUE/PREVIEW (13) button changes the function to PREVIEW and starts the CD from the programmed CUE POINT. Releasing the CUE/ PREVIEW (13) button will return the CD laser to the preset CUE POINT. TRACK M M: The TRACK (14) buttons let you select the track to play. 2. Slide the switch to 115 or 230 volts. 3. Do not force or twist the switch. Excessive force may cause damage. If the switch does not move smoothly, contact a qualified technician. CONNECTIONS: 1. Connect the power plug into the AC IN (2) for POWER. 2. Using the included cables, plug one end into the REMOTE CON...