Assessments - 4, GPA: 4.3
(
)
)
|
Fotos e especificações Gemini CDJ-15X |
Facilidade de uso
It will operate at 115 or 230 volts. To set the proper voltage follow these steps: 1. Place the head of a screw driver in the center of the VOLTAGE SELECTOR SLIDE (3) found on the rear panel. 2. Slide the switch left for 115 volts or push the switch right for 230 volts. 3. Do not force or twist the switch. Excessive force may cause damage. If the switch does not move smoothly, contact a qualified technician. CONNECTIONS: 1. Plug one end of a set of RCA connectors into each of the LINE OUTPUT (1) jacks. 2. Plug the other end of the RCA connectors into any available line level input jacks on your mixer. If you are playing the CDJ-15X through a receiver, you can plug the RCA connectors into the CD or AUX input jacks on your receiver. If there are no CD or AUX inputs, use any line level (not phono) inputs. FUNCTION DESCRIPTIONS: POWER SWITCH: After making sure that the VOLTAGE SELECTOR SLIDE (3), found on the rear panel, is properly set, plug the unit in and press the POWER (2) switch. The unit will turn on. Pushing the POWER (2) switch a second time will turn the unit off. DISC TRAY: The DISC TRAY (10) is where the CD is held. Pressing the disc tray OPEN (16) button will open the tray. OPEN BUTTON: Press the OPEN (16) button to open the DISC TRAY (10). DISPLAY: The DISPLAY (4) shows the track numbers, play mode, pause mode, and 3 different time displays. These time displays are time elapsed on the track, time remaining on the disc and time remaining on the track. PLAYBACK DISPLAY: The PLAYBACK DISPLAY (5) displays the time remaining to play and flashes slowly when the track has 30 seconds left. The PLAYBACK DISPLAY (5) flashes quickly when the track has 15 seconds left. PLAY/PAUSE HI : Each press of the PLAY/PAUSE (9) button causes the operation to change from play to pause or from pause back to play. See the CUE INSTRUCTIONS section for more information. TRACK SKIP MW: The TRACK SKIP (6) buttons let you select the track to play. SEARCH BUTTONS The SEARCH (7) buttons are used to move foward or reverse while in play mode. The SEARCH (7) buttons are also used to accurately position the disc at the point where you wish the track to start playing. This position on the track is memorized as the cue point. See the CUE INSTRUCTIONS section for more info. S70PH: The STOP (11) button will end the playing of the CD. TIME: The TIME (12) button switches the time display between the three available choices listed under DISPLAY. CUE: With the unit in the play mode, and after memorizing the cue point, pressing the CUE (8) button will cause the CD player to enter the pause mode at the memorized cue point. Holding down the cue button changes the cue function to preview (allowing you to hear the music play from the cue point) and releasing the cue button returns you to the preset cue point. If a cue point is not memorized, pressing the CUE (8) button will cause the unit to return to the beginning of that track. PITCH: Pushing the PITCH BUTTON (14) activates the pitch section of the unit. The pitch of the CD will change according to the position of the PITCH CONTROL (15). SINGLE-AUTO CUE/CONTINUOUS: Pressing the SINGLE-AUTO CUE/CONTINUOUS (13) button activates the AUTO CUE FUNCTION. The AUTO CUE FUNCTION causes the unit to pause at the beginning of music of the following track and allows you to start play immediately from the start of music without any blank space (which exists at the beginning of every track). Pressing the SINGLE-AUTO CUE/CONTINU OUS (13) button a second time activates the CONTINUOUS function causing the unit to play continuously (after the last track, the unit will return to the first track of the disc and continue to play). Pressing the SINGLE-AUTO CUE/CONTINUOUS (13) button a third time deactivates the CONTINUOUS function. C4D OPERATING INSTRUCTIONS: 1. Make sure that the VOLTAGE SELECTOR SLIDE (3), found on the rear panel, is set for the proper voltage. Plug the unit in and press the POWER (2) switch. 2. Press the OPEN (16) button, place a CD in the DISC TRAY (10) and close the tray door. The display will initially show the number of tracks and the total time of the CD. 3. Push the TRACK SKIP (6) buttons to select the track you want to play. 4. Press the PLAY/PAUSE (9) button and the unit will instantly play. CUE INSTRUCTIONS: 1. To start the play at a point other than the beginning of a track, follow these instructions: First choose the track you wish to play, and then press PLAY/PAUSE (9) so the unit goes into the play mode. Press PLAY/PAUSE (9) to pause play at the spot where you want the play to start the CUE POINT. Use the SEARCH BUTTONS (7) to pick the precise spot you want play to begin, then press PLAY/PAUSE (9) again to save the cue point. Press the CUE (8) button to pause play at the cue point (the unit will go into the pause mode and the location indicated on the display will be the memorized cue point). You can preview the cue point by pressing and holding down CUE...