Assessments - 4, GPA: 4.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
2 Press the P or p button to select "LINE IN GAIN". 3 Press the SET button. 4 Press the P or p button to select "HIGH". 5 Press the SET button. Sampling rate converter The main unit is equipped with a sampling rate converter to ensure that the original digital signals will be recorded regardless of the sampling frequency (32kHz, 44.1kHz or 48kHz) of the signal from the source. Manual Recording 6 21 4 MAXMIN PLAY MODE PHONES OPEN / CLOSE REC SELECTOR MIX BALANCE MULTI JOG REC LEVEL +– CANCELSETMENU REC/ REC MUTE SYNCHROCD EDIT CD REC FINALIZE LINECDDIGITAL POWER COMPACT DISC RECORDER SL-PR300 DISC1 DISC2 DISC3 OPEN / CLOSE DISC SELECTOR 3 2 1 LINE CD 35 1 Insert a recordable CD-R or CD-RW. 2 Select a recording source. Use the REC SELECTOR button to select the recording source. Press the button repeatedly to toggle between sources. The source type will appear in the display window, and a lamp (DIGITAL, CD or LINE) will light on the front panel showing the selected source. The order of toggling and appearance of the sources in the information display (starting from OPTICAL IN) are as follows. OPTICAL IN: Record digital signals via the OPTI CAL terminal. COAXIAL IN: Record via the COAXIAL terminal. CD DIGITAL: Record digital signals from 3-CD changer. CD ANALOG*: Record analog signals from 3-CD changer. LINE IN: Record via the LINE IN terminal. CD+LINE MIX**: Record via 3-CD changer and LINE mix. Notes •*In accordance with the SCMS (Serial Copy Management System), recording systems are not allowed to create a second- generation digital copy of a first generation copy (refer to SCMS see page 48). Therefore, if the CD-R or CD-RW disc loaded in the 3-CD changer is a first-generation digital copy, this recording selection must be used. If you attempt to record the disc using the digital setting, “SCMS PROTECT” is shown in the information display and recording will not be allowed. • ** MIX (combined) source recording is only possible in analog. • If a source has already been selected, the corresponding lamp will light and the selection will be shown in the display window. • When playback is stopped and the CDR is selected, press the DISPLAY button on the remote control repeatedly to show the recording time remaining on the disc. • High-speed recording is not possible when recording manually. 24 RQT6087 Recording onto CD-R/RW Discs Recording onto CD-R/RW Discs 3 Press 1REC/REC MUTE to put the CDR in recording pause mode. • The disc is read and OPC performed if required. • The remaining recording time on the CD-R or CD-RW disc is shown in the information display. 4 When analog signals are to be recorded, adjust the recording level while playing the source. • Press the MENU button first and turn the MULTI JOG to adjust the recording level. Then press the SET button. • Adjust the volume in such a way that MULTI JOG REC LEVEL the 0 dB display is not exceeded when +– the loudest sound is applied. L R 40 30 15 1020 6 30 dB The OVER indicator should not be made to light as this may cause distortion in the recording. • When CD ANALOG recording is selected, the recording level is set automatically to the CD in the 3-CD changer. 5 Press the CDR Control PLAY p button to start recording. 6 Play the sound of the source to be recorded. When recording is complete Press the CDR Control STOP s button to stop. The p indicator in the display window flashes and operation stops. Notes • You cannot record from multiple CDs. If create a program that changes CDs, a blank track of a few seconds will be added and recording will stop. • When “UNLOCK” is shown in the information display, the DIGITAL IN terminal is not connected properly to the source unit. • Upon completion of recording, the p indicator flashes in the display window. Operating any button while this indicator is flashing may render the disc being recorded unusable. Always wait until the p indicator stops flashing before proceeding with the next operation. • When digital input signals are supplied, they will be recorded in their original digital form as long as the source signal is not from a first-generation digital copy (refer to SCMS on see page 48). There is no need to adjust the recording level. To record silence in the recording MAXMIN PLAY MODE PHONES OPEN / CLOSE REC SELECTOR MIX BALANCE MULTI JOG REC LEVEL +– CANCELSETMENU REC/ REC MUTE SYNCHROCD EDIT CD REC FINALIZE LINECDDIGITAL POWER COMPACT DISC RECORDER SL-PR300 DISC1 DISC2 DISC3 OPEN / CLOSE DISC SELECTOR 3 2 1 LINE CD 1•REC REC MUTE RECSELECTOR MENU PITCH0 CANCEL PITCH+ SET PITCH– COMPACT DISC RECORDER RAK-PR300 FAD E SYNCHRO 1 1 Press the 1REC/REC MUTE button where you want record a four-second silence. • To record a silence longer than four seconds, keep pressing the 1REC/REC MUTE button as long as you want. Notes • Four seconds of silence will be recorded regardless of whether or not the button is held down for fewer or more than four seconds. After the four seconds of silence, the unit stops in the recording p...