Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
The batteries are automatically disconnected when the AC adapter is used. CAUTION: When not using AC power, disconnect the AC adapter from the wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands. Fully insert the plug without exposing any part of the blade. Input: 120V 60Hz ACOutput: 4.5V DC, 500 mA. Plug: 1.7 mm Female Type with Positive Center,UL Listed. Positive (+)Negative () 5 BASS BOOST TURNING POWER ON/OFF OPERATION OPERATION 1 1 To emphasize the bass, slide the DBBS switch to the ON position. For normal bass, slide the DBBS switch to the OFF position. To turn the unit on, press the PLAY/PAUSE ( )/POWER ON button ¶. To turn unit off, Press the STOP (n) /POWER OFF button ·. HOLD SWITCH 1 AUTO POWER OFF When the unit is stopped (Standby mode) for approximately one minute, the power will automatically turn off. To prevent accidentally pressing a button while walking, etc., slide the HOLD switch to the ON position; “HOLD” will appear in the display. When you want to use the buttons, slide to the OFF position; “HOLD” will disappear from the display. Sound Through a Home Audio System By using a home audio connection cable (not included), superb sound can be heard through your home audio system. Before making any connections, turn off the power to all equipment. Plug a connection cable (not included) between the LINE OUT jack on the side of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the amplifier’s PHONO jack.) NOTE: If the unit interferes with TV reception, move the unit away from the TV or turn off the power to this unit. 6 CD OPERATION CD OPERATION TO PLAY A CD (THIS UNIT CAN PLAY STANDARD OR CDR/RW DISCS) 1 2 Open the CD compartment lid by pressing the CD OPEN button. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the Headphones jack. While the unit is off, press the PLAY/PAUSE ( )/POWER ON button to start playback. To pause PLAYBACK, press the PLAY/PAUSE ( )/POWER ON button again, the display will blink. Press once again to resume playback. 3 4 Adjust the VOLUME control ¶ and DBBS When the disc is through playing, it will stop. switch · as desired. To skip forward or Press the STOP (n)/POWER OFF button to backward through the tracks on the disc, stop the disc before it is finished; the total press the SKIP/SEARCH . or . number of tracks and playing time will button. To search forward or backward appear. Press the STOP (n)/POWER OFF through the tracks on the disc, press and hold button again while in the stop mode to turn the SKIP/SEARCH . or . button. the unit off or wait approximately 60 seconds and the unit will automatically turn off. NOTES: • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “disc”. • As each track is played, the track number and elapsed time are shown in the display. • To remove the disc, open the CD Compartment, hold the edge of the CD and gently press the center spindle and lift the CD. • The maximum time of a CD is 74 minutes for this unit. • “OPEN” will appear in the display when the CD Door is opened. • This unit will play standard or CDR/RW discs. 7 CD OPERATION (CONTINUED) CD OPERATION (CONTINUED) MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM This CD player has a built-in Anti-Shock System that cuts down on CD skipping, which is useful when using the CD player in the car or while jogging/walking. Follow the steps below to activate and understand the Anti-Shock System: 1 2 Open the CD compartment lid by pressing the CD OPEN button. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the Headphones jack. With a CD inserted, press the PLAY/PAUSE ( )/POWER ON button to turn the unit on. 3 4 The Anti-Shock System will start automatically, the sound will mute for a moment and the display will show the Anti-Shock indicator with no bars in it. Within a few seconds, the Anti-Shock indicator will fill to indicate music signals are stored in memory. CONTINUED ON THE NEXT PAGE 8 CD OPERATION (CONTINUED) 5 6 If the CD player is subject to vibration during playback, the bars will disappear one by one. During the vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. At this time, the indicator will probably show fewer bars indicating the music signals stored in memory are low. If all the bars disappear and the CD player is subject to immediate vibration, the unit may skip. 7 8 If no more vibration occurs, the music signals are once again stored into the memory and the indicator returns to full. When the memory is full, the top bar will blink and the disc rotation speed will drop to save power consumption. To turn the Anti-Shock System off, p...
Este manual também é adequado para os modelos :CD-players - SB110 (160.95 kb)
CD-players - SB111 (160.95 kb)