Assessments - 3, GPA: 4.3
(
)
)
|
Fotos e especificações Yamaha CDX-397MK2 |
Facilidade de uso
3 4 5, 6 21 3 6 SEARCH SYNCHRO TAPE PEAK SPACE REPEAT DIMMER RANDOM INDEX09 65 87 21 43 A–B PROGRAM CLEAR SEARCH TIME/INFO SYNCHRO TAPE PEAK SPACE REPEAT DIMMER RANDOM A–B PROGRAM CLEAR 1 Press to stop the playback. * The peak level search function of this unit is useful for adjusting recording level on the tape deck. (For details, refer to page 20.) 2 If desired, you can automatically insert additional time space between tracks. (For details, refer to page 11.) SPACE AUTO SPC ON 3 Press TAPE to show the total possible recording time of the tape on the display. You can select any of the four tape lengths by pressing TAPE. 46 6090 54(off) TAPE “ TAPE 46 ” appears. If desired, you can also enter the total possible recording time of the tape manually. Example: For a C-64 tape (32 minutes on each side), press “6” and “4”. +6 4 4 Press REPEAT. The unit automatically programs tracks for both side A and side B considering the total time of the tape. REPEAT 5 Start recording on the tape deck, and then press on the remote control of this unit. 6 This unit automatically pauses at the end of the side A. Turn the tape over to the side B, resume recording on the tape deck, and then press or on the remote control of this unit to start playback. 16 En English Notes . In step 4, you can check the program data for side A and side B after pressing REPEAT. Information for each side is displayed for 3 seconds. 1 23 PROG. 1 Shows the number of programmed tracks. 2 Shows the total time of programmed tracks. 3 Shows the side of the tape. . All tracks may not be programmed if the tape length is not enough. To program all tracks, use a tape that is longer than the actual playing time. . You can check, cancel or correct program data. (For details, refer to page 15.) * When checking program data, note that “Pu” appears between track numbers for side A and side B. . Up to 40 tracks can be programmed. A pause inserted between side A and B is counted as one track. . CD synchronized recording function can be used if your tape deck is compatible with this unit. If so, in step 5 and 6, press SYNCHRO and then press on the remote control of this unit. Recording automatically starts. (For details, refer to page 21.) 17 En Manual tape-programming (for Audio CD) This is for recording desired tracks in any order onto a tape. 3, 5 6 7, 8 2 4 8 SEARCH SYNCHRO TAPE PEAK SPACE REPEAT DIMMER RANDOM INDEX09 65 87 21 43 A–B PROGRAM CLEAR SEARCH TIME/INFO FOLDER SYNCHRO TAPE PEAK SPACE REPEAT DIMMER RANDOM A–B PROGRAM CLEAR 1 Follow steps 1 – 3 on page 16. 2 Press PROGRAM. PROGRAM PROG. Blinks. 3 Use numeric buttons to select desired tracks (to be recorded on the side * Programmed track n 09 65 87 21 43 4 When track selection for side TAPE. A pause is inserted. PROG. TAPE 5 Use numeric buttons to select the track numbers (to be recorded on the side B) in any order. 09 65 87 21 43 6 Press PROGRAM. 7 Start recording on the tape deck, and then press on the remote control of this unit. 8 This unit automatically pauses at the end of the side A. Turn the tape over to the side B, resume recording on the tape deck, and then press or on the remote control of this unit to start playback. Notes . If, in step 3 or 5, “Err” appears on the display, the track number just selected cannot be programmed because there is not enough time remaining on the tape. . In step 3 or 5, each time a selection is made, the track number and the remaining time of the tape is displayed, and then the display changes to indicate the next program number. . You can check, cancel or correct program data. (For details, refer to page 15.) * When checking program data, note that “Pu” appears between track numbers for side A and side B. . Up to 40 tracks can be programmed. If, however, a pause is inserted, it is counted as one track. . CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 7 and 8, press SYNCHRO and then press on the remote control of this unit. Recording automatically starts. (For details, refer to page 21.) 18 En English Random sequential tape-programming (for Audio CD) The unit automatically programs tracks in random sequential order for recording to tape. SEARCH TIME/INFO FOLDER SYNCHRO TAPE PEAK SPACE REPEAT DIMMER RANDOM A–B PROGRAM CLEAR 3, 4 4 2 1 Follow steps 1 – 3 on page 16. 2 Press RANDOM. * The unit automatically programs tracks at random for both side A and side B considering the total time of the tape. RANDOM 3 Start recording on the tape deck, and then press on the remote control of this unit. 4 This unit automatically pauses at the end of the side A. Turn the tape over to the side B, resume recording on the tape deck, and then press or on the remote control of this unit to start playback. Notes . Because programmed data changes every time RANDOM is pressed, the unrecorded space at the end of each side of the tape also varies accordingly. . All tracks may not be programmed if the tape length is not enough. To progra...