Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
3 Shows the selected track number. 4 Shows the time displays. (For details, refer to “Selecting time displays and the text data” on the right column.) 5 Displays the numbers that correspond to the numbers of the tracks (as high as number 20) on the selected disc. After each track is played back, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. 6 Shows the level of signals output into an amplifier adjusted by using the OUTPUT LEVEL –/+ buttons. ¦ Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the DIMMER button. DIMMER ¦ Selecting time displays and the text data You can select any of the four time displays by pressing the TEXT/TIME display mode-select button. Since this unit is CD TEXT compatible, the disc title, artist name, and track name are also displayed in addition to the time displays when playing back a CD with CD TEXT. Each time you press the TEXT/TIME display mode-select button, the display changes as follows. 1 Elapsed time of the track now playing back TEXT/ TIME 5DISCS 12345 2345 67 8910 11 12 2 2:35 2 Remaining time of the track now playing back 5DISCS 12345 2345 67 8 910 11 12 2 -1:02 3 Total disc playback time 5DISCS 12345 2345 67 8 910 11 12 TOTAL 38:14 4 Total remaining time on the disc Artist name Track name when playing back a disc without CD TEXT when playing back a CD TEXT disc Notes • The remaining time 2 will not be displayed if the track number is 21 or higher. • The disc title, artist names, or track names may not be displayed with some CD TEXT discs. In this case, “NO ENTRY” appears in the display. 5DISCS 12345 2345 67 8 910 11 12 TOTAL -32:27 Disc title 8 En 01_En_02_star_CDC-697_G.pm 8 7/6/06, 0:55 BASIC OPERATION This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. Turning On and Off the Power POWER ¦ To turn on this unit Press the POWER button inward to the ON position. NATURAL SOUND COMPACT DISC PLAYER CDC-697 DISC 1 2 3 4 5STANDBY /ON POWER ON OFF STANDBY/ON SYNCHRO DIMMER STANDBY/ON PEAK OPEN/ CLOSE TEXT/ TIME PLAYXCHANGE POWER ON OFF On the front panel •Press the STANDBY/ON button to set this unit to the standby mode. STANDBY/ON STANDBY /ON On the remote control On the front panel transmitter •Press the STANDBY/ON button to turn on this unit. STANDBY/ON STANDBY /ON On the remote control On the front panel transmitter Note You can operate this unit only when the POWER button is pressed inward to the ON position. ¦ To turn off this unit Press the POWER button again to release it outward to the OFF position. POWER ON OFF On the front panel Loading and Playing Discs 1,2 DISC SCAN REPEAT CDC8 WH26170 RANDOM 4 3 4 DISC SKIP SYNCHRO DIMMER STANDBY/ON PEAK PROGCLEARTAPE 321 654 987 INDEX+100 OUTPUT LEVELMODE DISC SCAN DISC SKIP +- OPEN/ CLOSE TEXT/ TIME 1Open the disc tray and load discs. Use the disc guides to align the discs correctly in the tray. Label side upward OPEN/ CLOSE Disc tray To play back an 8 cm (3 inch) CD, place it in the inner recessed area of the disc tray. Do not put a normal (12 cm (5 inch)) CD on top of an 8 cm CD. 2Close the disc tray. OPEN/ CLOSE •You can also close the disc tray by pressing the w/d button on the front panel, a DISC-select button on the front panel, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, playback will start automatically, however, the display will not show the total number of tracks and the total recorded time of the first selected disc. PLAYING CDS English 9 En 01_En_03_play_CDC-697_G.pm 9 7/6/06, 0:55 BASIC OPERATION 3Select a desired disc play mode (1DISC or 5DISCS) confirming it on the display. MODE 1DISC 5DISCS Shows the selected disc mode. “1DISC” mode: The unit will play back a designated disc only. “5DISCS” mode: The unit will play back all discs on the tray in sequence. 4Start playback from the first track of the disc 1. * If necessary, select a desired disc by using the DISC SKIP buttons, or a DISC-select button on the front panel. DISC DISC SKIP or 2 3 4 On the remote control On the front panel transmitter Playback will automatically start. ¦ To stop playback temporarily or On the remote control On the front panel transmitter To resume playback, press the d button again (or press the w button). *The w/d button on the front panel can also be used to stop playback temporarily or to resume playback. ¦ To stop playback completely or On the remote control On the front panel transmitter PLAYXCHANGE During playback, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc playback. However, in this case, pressing the DISC SKIP buttons has no effect. You can load or replace discs on the trays when the disc tray is opening, however, never load a...