Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
6 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. REPEAT 21 SPACE TAPEPEAK SYNCHRO 3 INDEX PROGCLEAR OPEN/ CLOSE 87 9 0 54 6 +I0 DIMMER TIME REPEAT RANDOM SEARCH SKIP STOP PAUSE PLAY 6, 7 7 4 6 4 + 1 Stop the unit. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 17.) STOP 2 If you desire, you can automatically insert additional time space between tracks. (Refer to page 9.) SPACE SPACE 3 Enter the tape’s total possible recording time. You can select any of four preset tape lengths by pressing the TAPE button. TAPE TAPE (off) Notes • All tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a longer tape. • CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 6 and 7, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 18.) Display information (at step 5) PROGRAMA TOTAL 12 3 1 Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. 2 Shows the total time of programmed tracks for each side. 3 Shows the side of the tape. Note on tape programming To check, cancel or correct program data, refer to page 13. * In checking the program data, note that “Pu” appears between track numbers for side A and side B. English n Manual tape-programming 4 This is for recording desired tracks in any desired order onto a tape. 2 3, 5 7 6, 7 21 SPACE TAPEPEAK SYNCHRO 3 INDEX PROGCLEAR OPEN/ CLOSE 87 9 0 54 6 +I0 DIMMER TIME REPEAT RANDOM SEARCH SKIP STOP PAUSE PLAY 1 Follow steps 1 – 4 on page 14. 2 PROG PROGRAM A REMAIN TOTAL 3 Program desired tracks (to be recorded on side A) in any desired order. 21 3 87 9 0 54 6 +I0 4 When track selection for side A is finished, press the TAPE button. TAPE A pause mode is programmed. 5 Select the track numbers (to be recorded on side B) in any desired order. 21 3 87 9 0 54 6 +I0 6 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Notes • If, in step 3 or 5, “E rr” appears on the display, the track number just selected cannot be programmed because there is not enough time remaining on the tape. • In step 3 or 5, each time a selection is made, the track number and the tape’s remaining time will be displayed, and then the display will change to indicate the next program number. • CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 6 and 7, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 18.) Notes on tape programming • To check, cancel or correct program data, refer to page 13. • This function can be used to program up to track number 24. * In checking the program data, note that “Pu” appears If the disc has more than 24 tracks, track number 25 and between track numbers for side A and side B. thereafter will not be programmed. • Up to a maximum of 25 tracks can be programmed. If, however, the PAUSE mode is inserted, it is counted as one track. n Random sequential tape-programming The unit will automatically program tracks in random sequential order for recording to tape. 21 SPACE TAPEPEAK SYNCHRO 3 INDEX PROGCLEAR OPEN/ CLOSE 87 9 0 54 6 +I0 DIMMER TIME REPEAT RANDOM SEARCH SKIP STOP PAUSE PLAY 2 4 3, 4 1 Follow steps 1 – 4 on page 14. 2 The unit will automatically program tracks for side A and side B separately considering the tape’s total time. * The display shows momentarily the programmed track numbers, the total number of programmed tracks and the total time of programmed tracks for side A and B respectively. RANDOM 3 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Notes • Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. • If the tape’s length is not enough, all tracks cannot be programmed. In this case, exchange the tape for a longer one. • CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 3 and 4, press the SYNCHRO button and then press the PLAY button on ...