Log:
Assessments - 2, GPA: 3.5 ( )

Instruções de Operação Kenwood, Modelo D-R350

Fabricante : Kenwood
Arquivo Tamanho: 587.99 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


DETIDSI?C ODo this operation in the stop mode. RC operation Press the numeric keys as shown below... 30-minute tape : 000) 46-minute tape : 00006 GRC operation Press the ENTER key after selecting each numeric icon. 30-minute tape : 0ENTER, 0ENTER, 0ENTER, )ENTER DETIDSI3CC4-6 ORecording within 99 minutes can be specified in minutes (2 digits). OIf you commit a mistake in time entry, press the P.MODE key and restart the procedure from the beginning. OBy pressing the TIME key the set time-length intervals will change in this order: "46=54=60=74=90=??" = OThe interval length can be adjusted with the skip keys 4 and . in units of one minute (to a maximum of 99 minutes). Editing D-R350 (En) The CD contents are edited as follows. (1) The tape recording time input is divided by two, and tracks that can Editing in the FILE A be accommodated in file A (which refers to tracks on tape side A) are selected in order of their track Nos. EDITA01 (2) In a few seconds, the time left on tape side A is displayed, then file B (tracks on tape side B) is edited in the same manner. The selected track numbers are displayed in sequence. EDITA -1:32 Remaining time display. NotesNotes 1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the last track on side A or side B may be cut short. 2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music. To check the edited contents Remote control unit only GRC operationRC operation CHECK Check ENTER Playing or recording the edited contents GRC operationRC operation 6 Return ENTER ENTER To clear the edited contents EDITA01 OWhen the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. NoteNote Press the 6 key to start playback according to the edited content. The playback pauses at the beginning of the track edited for tape side B. Press the 6 key again to continue playback. When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks. OFor details, see the instruction manual of the cassette deck. Press any one of these keys. GRC operationRC operation P.MODE P.mode ENTER Clear ENTER CLEAR Main unit operation 0 Do this operation in the stop mode. OThe edited data is cleared entirely. Playback in a random order (Random playback) D-R350 (En) As tracks are selected at random, you can enjoy listening to for a long time. OLoad a disc in the CD player.Preparation GRC operation : Complete the procedure in “Basic Operations for the Graphical Remote Control Unit (GRC)” 90 : Keys and control used in the operations described on this page. 1 1 Check that the unit is in the normal play TRACK mode. ! 2 2 Press the RANDOM key. RANDOM Mode Random ENTER ENTER GRC operationMain unit operation During track selection: ”>“ and ”<“ move from the outside to the inside. <<><<21>><>> C The number here changes. RNDM 05 In case track No. 5 is selected OEach time a track ends, the same operation as above is repeated, and the track selected next is played. ORandom play stops after all of the tunes have been played once. OThe random playback can also be repeated by pressing the REPEAT key. To select another track in the middle of playing one To cancel random playback OPressing the 4 key once returns to the beginning of the track being played. . NEXT Return ENTER ENTER GRC operationRC operation OPress the RANDOM key to start normal playback. RANDOM Mode Random ENTER ENTER GRC operationMain unit operation D-R350 (En) Maintenance D-R350 (En) Caution on disc used Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the CD player and store it in its case. Label side Playing side Sticky paste Sticker Never play a cracked or warped disc. During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Do not use cleaning discs. Please do not use commercially available cleaning discs, they may dam- age the internal mechanism. Disc handling precautions Handling Hold compact discs so that you do not touch the playing surface. Be especially careful in the following conditions: OWhen the unit is brought from a cold place to a warm place, and there is a large temperature difference. OWhen a heater starts operating. OWhen the unit is brought from an air - conditioned place to a place of high temperature with high humidity. OWhen there is a large difference between the internal temperature of the unit and the ambient temperature, or in conditions where condensation occurs easily. ODo not attach pap...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias