Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Press and hold to rewind a track. g Star t, pause, or resume disc play. h Disc compartment cover i VOLUME Rotate to adjust the volume level. j PROG Program tracks. k Source selector Slide to select a source: disc or FM radio. l DBB Press to enable or disable the DBB sound effect. m & % n Press to skip to the next track. Press and hold to search forward fast. o Stop disc play. p FM antenna q Battery compartment cover r MP3-LINK Connect to the audio output socket (usually the headphone socket) of an external device. s DC 9V Connect to the AC-DC power adaptor. Get started Caution . Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Install batteries Note . You can use either batteries or AC power as power supply of the CD sound machine. No batter y is packed with the accessories. 1 Slide the cover of batter y compar tment downwards to remove it. 2 Inser t six batteries (type: R-14, UM-2 or C-cells) with correct polarity (+/-) as indicated. 3 Fix the cover of batter y compar tment to the CD sound machine. Connect power DC9V Connect the power adaptor to the DC 9V socket on the back of CD sound machine, and the power supply socket. Tip To use batteries as the power supply, disconnect the power adaptor from the CD sound machine. Turn on Press . » When the source selector is in the “CD“ position, is displayed. Switch modes Automatically switch the modes: After the CD sound machine keeps inactive for 5 minutes, it automatically switches to standby mode. Manually switch the modes: Press to switch the CD sound machine between working mode and standby mode. Select a source Slide the source selector to CD or FM. When an MP3 link cable is connected to the MP3-LINK socket, the system automatically switches the source to audio input through the MP3-LINK socket. 4 Play Play CD 1 Slide the source selector to CD. 2 Press to eject the cover of disc compar tment. 3 Load a disc with the printed side facing outwards. 4 Close the cover of disc compar tment. 5 Press to star t play. Control play During play, follow the instructions below to control play. Buttons Functions Pause or resume play. Stop play. Skip to the previous/next track. Press and hold to rewind a track or search forward fast within a track. / Select a play mode: repeat the current track ( ), repeat all tracks ( ALL), or play tracks in sequence. " % ' % programmed tracks) Program tracks Note You can program a maximum of 20 tracks. . During programming, if no operation is made within 20 seconds, the system returns to stop mode without saving programmed tracks. 1 Press to stop play. 2 Press PROG to activate the program mode. » ' *8 PROG (program) and blink. 3 Press / to select a track. 4 Press PROG to program the selected track. » $ * PROG (program) and blink. 5 Repeat steps 3 and 4 to program more tracks. 6 Press to star t playing the programmed tracks. » During play, PROG is displayed. To erase the program, press twice, eject the CD compar tment cover, or switch to another source. To review the program, press once to stop play, and then press PROG repeatedly. Listen to radio Note For optimal reception, fully extend the FM antenna and adjust its position. 1 Slide the source selector to FM. 2 Rotate the TUNING knob to tune to an FM radio station. Listen to an external device You can use the CD sound machine as a speaker to amplify the audio input from an external device, for example, MP3 player. DC9VPM3-KNILDC9VPM3-KNIL 1 Turn on the CD sound machine. 2 Connect the MP3 link cable to the MP3-LINK socket on the back of this CD sound machine, and the audio output socket (usually the headphone socket) on the external device. 3 Play the external device. Note . To play audio input from other sources, disconnect the MP3 link cable from the system. Adjust sound The following operations are applicable to all suppor ted media. Adjust the volume level Rotate the - VOLUME + knob clockwise or anti-clockwise to increase or decrease the volume level. Use the DBB sound effect Press DBB to enable or disable dynamic bass boost. » If DBB is activated, DBB is displayed. Product information Note Product information is subject to change without prior notice. . Disc Laser type Semiconductor Disc diameter 12 cm, 8 cm Suppor ted discs CD-DA, CD-R, CD-RW Audio DAC 24 Bits, 44.1 kHz Total harmonic distor tion < 1% Frequency response 60 Hz -16 kHz S/N Ratio > 62 dB Tuner Tuning range FM: 87.5-108 MHz Total harmonic distor tion < 3% Signal-to-noise ratio > 50 dB General AC power input 100-240 V~, 50-60 Hz, 0.35 A Output of AC-DC power adaptor 9 V , 800 mA Model No. of AC-DC power adaptor Y12FE-090-0800G Batteries 6 X 1.5 V , R14/UM2/C cell Operation power consumption 5 W Dimensions (W x H x D) 380 x 200 x 93 mm Net weight 1.5 kg Gross weight 1.8 kg Maintenance Clean the cabinet Use a soft cl...