Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
About “Large” or “Small” speaker
Adjusting the output level balance of
A “Large” speaker is a speaker that can reproduce bass
each speaker
frequencies plentifully. If you select “Small” for the
surround speakers, the bass frequencies will come
You can adjust following items with the Multi-channel
from the front speakers and/or sub woofer.
management function:
For normal use, select “MCH Direct” or set all the
CNTR BALANCE
speakers to “Large” (ex. “5 – Large + SW,” “5 – Large,”
The relative output level balance between the front
etc.). If the sound is noisy or the Multi-channel
speakers (FRONT L/R) and the center speaker (CENTER)
playback is not effective while playing a Multi-channel
Super Audio CD, change the settings of the speakers
SURR BALANCE
concerned to “Small.”
The relative output level balance between the front
speakers (FRONT L/R) and the surround speakers (SURR
4 Turn l AMS L until desired mode appears in
L/R)
the display.
SW BALANCE
5 Press l AMS L.
The relative output level balance between the front
Playing Discs
The output level balance setting display appears.
speakers (FRONT L/R) and the sub woofer (SUB
To set the output level balance, go to Step 4 in
WOOFER)
“Adjusting the output level balance on the front panel
Note
of the player” on page 23 or Step 2 in “Adjusting the
Some adjustment may not work depending on the Multi-channel
output level from the remote” on page 24.
playback mode that you selected.
To return to the normal display, press MENU.
Notes
Adjusting the output level balance on the front
• The Multi-channel management function does not work when
panel of the player
you select “MCH Direct” (you cannot set the output level
You can adjust the output level balance of each speaker
balance of each speaker).
while listening during playback. You can also adjust while
• The front speaker setting is set to “Large” automatically when
listening to the test tone during stop mode.
you set the Sub woofer to “––.”
• When you play a track that does not contain the LFE* signal,
1 Press MENU.
the signal for the Sub woofer does not output. Therefore, when
2 Turn l AMS L until “LEVEL ADJUST” appears
you select “MCH Direct,” “5 – Large + SW,” or “No – CNTR +
in the display.
SW,” no signal outputs from the Sub woofer. However, when
you select “5 – Small + SW” or “FRT – Large +SW” (when you
3 Press l AMS L.
set the speaker setting to “Small”), the bass frequencies will
During playback, go to Step 6.
come from the sub woofer.
* Low Frequency Enhancement (described as “.1 CH”)
4 Turn l AMS L until “TONE ON” appears in the
display.
5 Press l AMS L.
The test tone issues from the speakers in sequence
with the speaker type appearing in the display.
6 Turn l AMS L until the desired item appears
in the display.
Select the item from “CNTR BALANCE,” “SURR
BALANCE,” or “SW BALANCE.”
Note
When you set the Sub woofer to “––” in the Multi-channel
playback mode (page 22), “SW BALANCE” does not appear.
Similarly, “CNTR BALANCE” or “SURR BALANCE” does
not appear when you set the corresponding speaker to “––.”
23GB
...