Assessments - 4, GPA: 4.3
(
)
)
|
Fotos e especificações Cambridge Audio AZUR 350C |
Facilidade de uso
No other discs can be used. Any CD-R/CD-RW discs should contain properly recorded TOC (Table of Contents) information so that they can be played back. This unit can play only the discs recorded in the CD-DA format designed for music reproduction. Do not attempt to play a disc containing other data, such as a CD-ROM for PCs with mp3 or WMA files, on this unit. 1. Switch on your amplifier and set its input selector to the correct position. Adjust the volume control to a minimum. 2. Press the Open/Close button to open the disc tray and load a disc. 3. Press the Open/Close button again to close the tray. The CD player will read the disc. 4. To begin playback, press Play. 5. When the last track has finished playing, the display will return to Table of Contents (TOC). 6. To stop the disc at any point, press the Stop button. Pressing the Pause button while the disc is playing will pause the disc and illuminate the pause icon on the display. Playback can be resumed by pressing Play again. Locating a specific track during playback 1. A single short press of the Skip/Scan > button will take you to the beginning of the next track on the CD. Repeat as necessary. 2. A single short press of the Skip/Scan < button will take you to the beginning of the previous track. Locating a specific track when playback is stopped 1. A single short press of the Skip/Scan > button will skip between tracks. 2. Press and hold to scroll rapidly through tracks. 3. Press Play to start playback from the selected track. Repeating discs and tracks 1. Ensure that the disc is loaded. 2. Press the Repeat button on the remote control. ‘Repeat All’ will appear on the display. Press Play. The whole disc will now be repeated until the function is turned off. 3. To repeat a specific track, press Repeat twice while the track is playing. ‘Repeat Track’ will appear on the display. Press Play and the selected track will now repeat until the function is turned off. Alternatively, press Repeat twice, select the chosen track using the numerical buttons on the remote control and press Play. 4. Press Repeat again either before or during playback to turn off the repeat function. Note: – ‘Repeat Track’ is not available in Program mode. – Selecting ‘Repeat Track’ when ‘Random’ mode has been selected will automatically cancel ‘Random’ mode. Playing tracks in random order 1. Ensure that a disc is loaded. 2. Press the Random button on the remote control. ‘Random’ will appear on the display. 3. Press Play. The CD player will now play the entire disc in random order. It is also possible to press the Random button during playback to listen to tracks in random order. 4. Press Random to exit the Random function. The disc will continue playing to the end in the correct order. 5. Press the Stop button at any time to stop the disc. Note: Selecting ‘Random’ mode when ‘Repeat Track’ has been selected will automatically cancel ‘Repeat Track’ mode. Using the Remain function 1. Ensure that the disc is playing. 2. Press the Remain button on the remote control once to display the time remaining for the track playing. 3. Press Remain a second time to show the total remaining disc time. 4. Press Remain again either before or during playback to return to normal play mode. azur 350C Programming disc play It is possible to program the 350C to play back in any order only the tracks you wish to listen to. 1. Ensure that a disc is loaded. The display should show the TOC data. 2. Press Program on the remote control. The Program set-up will appear in the display (as long as the display backlight is set to ‘Bright’ or ‘Dim’ modes). ‘ST:01’ will flash. 3. Using the , 0-9 or -/-- buttons, skip to or enter the track number that you want to program as your first track. 4. Press . The desired track is now programmed. The program number automatically increases by one for the next entry. 5. Repeat steps three and four until all your desired tracks are entered. A maximum of 30 tracks can be programmed. 6. To go back and change a programmed track, press to locate the desired program step. ‘ST:0-’ does not flash. Press • to choose the replacement track. ‘ST:0-’ flashes to indicate a change of program. Press to select the new track and continue. 7. Press Program or to exit. Press Program again to return to program editing. At this point you can either press again to delete the program and return to TOC display, or press to start playing your selection. 8. When is pressed, ‘Program Play’ appears briefly on the display and playback of the programmed tracks commences. 10. Pressing during playback will take you back to the ‘Program Mode’ stage. Pressing again at this point deletes the program. Note: – During programmed playback, it is possible to use the ‘Remain’ function only to show the time remaining on the track playing. You can not view the time remaining on the disc. – Only the ‘Repeat All’ feature can be used during Program mode. You are not able to repeat specific tracks in the program. Using the se...