Assessments - 4, GPA: 3.5
(
)
)
|
Fotos e especificações Denon DCD-700AE |
Facilidade de uso
1 w Service station list.................................................................... 1 e Remote control unit (RC-1032) ................................................ 1 r R03/AAA batteries ................................................................... 2 t Pin-plug cable (Cable length: Approx. 1.0 m) ........................... 1 e rt Before using • Handle the power supply cord carefully. Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When disconnecting the power supply cord from the wall outlet, hold the plug and do not pull on the cable. • Do not open the top cover. In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer. • Do not place anything inside. Prevent metal objects from entering the CD player and avoid spilling liquids on it. Electric shock or malfunction may result. • Cautions on moving. First, if a disc is loaded, eject it, then turn off the power, unplug the power supply cord from the power outlet and disconnect connection cables with other devices. • Cautions on using mobile phones. Using a mobile phone near this unit may result the mobile phone away from this unit when • Store these instructions in a safe place. After reading, store this instructions a safe place. • Note that the illustrations in the actual unit for explanation NOTE: • This CD player uses To ensure stable operation, it is recommended temperature of Discs usable on this set q Music CDs Discs with the mark at the right can be used on this set. Note however that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played. Do not attempt to play them, as doing so could damage the set. w CD-R/CD-RW • Some discs and some recording formats may not be playable. • Non-finalized discs cannot be played. Finalization: Finalization is the process that makes recorded CD-R/CD-RW discs playable on compatible players. Holding discs Do not touch the signal surface. • Set the disc with the labeled side facing up. • Make sure the disc tray is fully open when inserting the disc. • Place the discs flatly, 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the inner tray guide (Figure 2). Figure 1 Outer tray guide 12 cm discs Figure 2 Inner tray guide 8 cm discs • Place 8 cm discs in the inner tray guide without using an adapter. • “00 Tr 00 : 00” is displayed if a disc that cannot be played is inserted. • “NO DISC” is displayed if a disc is loaded upside down or if no disc is loaded. 2 ENGLISH ENGLISH ENGLISH Cautions on loading discs • Only load one disc at a time. Loading two or more discs can damage the set or scratch the discs. • Do not use cracked or warped discs or discs that have been repaired with adhesive, etc. • Do not use discs on which the sticky part of cellophane tape or labels is exposed or on which there are traces of where labels have been removed. Such discs could get caught inside the player and damage it. Cautions on handling • Do not get fingerprints, oil or dirt on discs. • Take special care not to scratch discs when removing them from their cases. • Do not bend or heat discs. • Do not enlarge the hole at the center. • Do not write on the labeled (printed) surface with ball-point pens, pencils, etc., or stick new labels on discs. • Water droplets may form on discs if they are moved suddenly from a cold place (outdoors for example) to a warm place, but do not try to dry them off using a hairdryer, etc. Cautions on storing discs • Be sure to remove discs after using them. • Be sure to store discs in their cases to protect them from dust, scratches, warping, etc. • Do not store discs in the following places: 1. Places exposed to direct sunlight for long periods of time 2. Dusty or humid places 3. Places exposed to heat from heating appliances, etc. Cleaning discs • If there are fingerprints or dirt on discs, wipe them off before using the disc. If not the sound quality could be reduced and the sound may be broken. • Use a commercially available disc cleaning set or a soft cloth to clean discs. Gently wipe the disc from the inside towards the outside. Do not wipe with a circular motion. NOTE: • Do not use record spray, antistatic agents, or benzene, thinner or other solvents. About the remote control unit Inserting the batteries q Remove the remote control w Set two R03/AAA batteries in unit’s rear cover. the battery compartment in the indicated direction. e Put the rear cover back on. Notes on batteries: • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the unit. (The attached batteries are only for verifying operation.) • When inserting the batteries, be sure to do so in the proper direction, following the “ < ” and “ > ” marks in the battery compartment. • To prevent damage or leakage of battery fluid: • Do not use a new battery together with an old one. • Do not use two di...