Assessments - 5, GPA: 3.2
(
)
)
|
Fotos e especificações Denon DN-D4500 |
Facilidade de uso
Seamless Loop Playback can be looped between any two points in a track without any break in the audio. Two loop start points (A-1 and A-2) can be set anywhere within the track or disc. 16. Hot Start / Stutter Playback can be started instantaneously from points A-1 and A-2. In the stutter mode, these same buttons play momentary audio while pressed and held down. 17. Brake 18. Relay Play When this mode is set, CD1 and CD2 starts playback alternately. This unit can relay the playback of CD1 and CD2 every track or every disc. 19. Power on Play The player can be set so that playback in the relay mode starts when the power is turned on. 10. Fader Start The DN-D4500 FADER START controls are compatible with our DN-X400, DN-X500, DN-X800, DN-X900 or DN-X1500 mixers. 11. Auto Disc Tray Close System 12. Preset functions - Different presets can be changed according to your needs. 13. Custom Setting Memory 14. CD TEXT / MP3 ID3 Tag name display 15. CD-R / RW Playback This player can play CD-R/RW discs, but only if they are finalized. Note: However that depending on the recording quality, the player may not be able to play some finalized CD-R/RW discs. DN-D4500 Max. 10° 2 CONNECTIONS/INSTALLATION 1. Turn off the POWER switch. 2. Connect the RCA pin cords to the inputs on your mixer. 3. Connect the control cord to the REMOTE connector on the RC-D45. CAUTION: • Be sure to use the supplied control cord. Using another type of cable may result in damage. • Be sure the power is off when connecting the control cord. Otherwise the units may not work properly. • Never connect any remote controllers other than the RC-D45. Doing so can damage the equipment. The DN-D4500 will work normally when the player unit is mounted within 10 degrees off the vertical plane at the front panel. If the unit is tilted excessively, the disc may not be loaded or unloaded properly. CH3 Fader jack CH4 Fader jack 3.5 mm stereo mini cord DN-X900 DN-D4500 CD1 Fader jack 3.5 mm stereo mini cord CD2 Fader jack RCA Cord CH3 input jack CH4 input jack RCA Cord CD1 Output jack CD2 Output jack NOTE: • Use a commercially available 3.5mm stereo mini cord for the Fader jack connections. ENGLISH PART NAMES AND FUNCTIONS (Refer to page 3.) (1) DN-D4500 Front panel q POWER button ( . ON . OFF) • Push this button to turn the power on. NOTE: • Be sure to close the disc holders before turning off the power. w POWER indicator • This lights when the power is on. e Disc holder • Place discs in this holder. • Push the disc holder OPEN/CLOSE button to open and close the disc holder. CAUTION: • Do not place foreign objects in the disc holders. Doing so could damage the player. • Do not push the disc tray in manually when the power is off, as this may result in malfunction and damage the player. r Disc holder LED • This flashes while the disc holder is opening and closing. • The LED lights when the disc holder is open and serves as the disc holder illumination. t Disc holder OPEN/CLOSE button • Push this button to open and close the disc holder. • The disc holder will not open during playback. Stop playback before pushing this button. (2) RC-D45 Front panel CAUTION: • Note that there are many buttons working two different functions selected by short time pushing or long pushing (1second or more). The mark indicates short time push function and mark indicates long time push function. y Jog wheel (inner wheel) • In the pause, CUE or Frame repeat mode, turn this wheel during for search operation to find the CUE point in units of frames. • In the Playback mode, turn this wheel to temporarily pitch bend the playing speed. u Continue/Single button ( CONT./SINGLE, RELAY) • CONT./SINGLE: Short pushing play ending mode between CONT. (continue: play more tracks) and SINGLE (stop playing and ReCUE’s back to your set point). • SINGLE PLAY LOCK: SINGLE PLAY LOCK can be selected by PRESET(10). At this time , if this button is pushed, it will be selected. When SINGLE PLAY LOCK is selected, track selection during playback is disabled. This prevents playback from stopping when the Track Select Knob is turned accidentally during playback. Play ending mode is the same as single. • RELAY: When this button is pushed for more than 1 sec, you can turn on and off RELAY PLAY mode. i BRAKE button When this button is pushed you can turn the Brake mode on and off. o TRACK SELECT/MP3 SEARCH MODE knob • TRACK: Turn this knob to select the first or next track to be played. Turn the knob clockwise by one click to move one track forward, counterclockwise by one click to move one track backward. When the knob is turned while pressing it down, one click corresponds to advancing 10 tracks at a time. In the Preset and Memo mode, use this knob to set and enter Preset and Memo settings. • MP3 SEARCH MODE: MP3 DISC only. When pushing this knob down for more than 1 second, the MP3 file search selection mode is selected. ! 0 CUE button • Pushing the CUE button during play provides a return to the position at which play...