Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Set it to PCM for the decoder that is not used currently. Playing back a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. • The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD deck or DAT deck. • Set DOLBY DIGITAL or DTS to PCM for audio output in the setup mode for connecting to an MD deck or DAT deck (refer to page 26). • Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a decoder, etc., that is not DTS-compatible. • When playing a copyright-protected over 96kHz (88.2kHz) PCM DVD, the digital sound will be down sampled at 48kHz (44.1kHz), even if you set LPCM SELECT to OFF (refer to page 26). • Super Audio CD sound is not output as digital sound. Optical cable (commercially available) • Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 15 cm or more when storing them. • Use a cable which is 3m or shorter. • Insert cable plugs firmly into the connectors when making connections. • If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector. –12– EN CONNECTIONS CONNECTIONS Analog 5.1-channel audio signals can be output from the DVD player. The multichannel audio signals recorded in packed PCM and the multichannel Super Audio CDs can be played back when an AV amplifier equipped with analog 5.1-channel audio inputs is connected. Front speaker Center speaker (left) AV amplifier Subwoofer Front speaker (right) Surround Surround with speaker 5.1-channel speaker (left) audio input jacks (right) AUDIO DVD English To 5.1-channel Audio Input Jacks Speaker Cable (commercially available) 5.1ch AUDIO OUT NOTES: • For 5.1-channel connections, set ANALOG AUDIO to MULTI CHANNEL in the setup mode and adjust Speaker Configuration, DELAY TIME and CHANNEL LEVEL settings (refer to pages 26-27). • You can enjoy high-quality analog sound by cutting off the video signal. Press the PURE DIRECT button on the front panel. –13– EN CONNECTIONS Connection to a TV (for video) DVD S-VIDEO INVIDEO INLR CB/PBYCR/PR COMPONENT VIDEO INTV Good picture Basic audio Better picture Best picture Method 1 Method 2 Method 3 Video Cable (supplied) S-Video Cable (commercially available) Component Video Cable (commercially available) Audio Cable (supplied) CONNECTIONS Connection to a TV (for video) DVD S-VIDEO INVIDEO INLR CB/PBYCR/PR COMPONENT VIDEO INTV Good picture Basic audio Better picture Best picture Method 1 Method 2 Method 3 Video Cable (supplied) S-Video Cable (commercially available) Component Video Cable (commercially available) Audio Cable (supplied) • Method 1 DVD Player + TV with Video Input Jack • Method 2 DVD Player + TV with S-Video Input Jack • Method 3 DVD Player + TV with Component Video Jacks NOTES: • Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system. • S-Video output connector The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture. If the TV is equipped with a S-Video input connector, we recommend connecting it to this unit’s S-Video output connector using a commercially available S-Video connection cord. HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above. NOTE: • The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator. –14– EN CONNECTIONS CONNECTIONS A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High- Definition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other sources, DVD-Video, and the multi-channel sound of DVD-Audio. English To HDMI Input Connector HDMI cable (commercially available) A display equipment with an HDMI compatible port C Actual output modes by media Audio Recording Format HDMI AUDIO Setting 2 CHANNEL MULTI CHANNEL DOLBY DIGITAL/DTS Setting BIT...