Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Your Khaki Field Multi-Touch watch incorporates state-of-the-art technology. It offers permanent analog display of the time as well as varied digital displays. In addition, the following functions are available by simply touching the glass: barometer, altimeter, chronograph, compass, alarm and thermometer. Important notes For the best reading of the temperature, remove the watch from your wrist and wait for approximately 15 to 30 minutes. For more information see the explanation of the thermometer on page 22. For correct use of the altimeter, adjust it as often as possible. For more information see the explanation of the altimeter on page 20. The barometer function (METEO) indicates a trend. Hands superposed to the left of midday = bad weather, at midday = stable weather, to the right of midday = good weather. For more information, see the explanation of the barometer function on page 16. Your watch is waterproof to 30 m. However, no function can be operated if the glass is in contact with a liquid. General information on use • Activate the glass by pressing • When the glass is activated, a flashing bar will appear on the digital display • Select a function by touching the corresponding area on the glass • Brief presses on the pushers = step by step movement of the hands or incrementation (decrementation) on the digital display • Long presses on the pushers = continuous movement or incrementation (decrementation) • Incorrect operation of the pushers = different alarm from the normal beep • No operation for 30 seconds = automatic deactivation of the glass • No operation for 3 seconds in setting mode = exit setting mode Use: Adjustment: Touching action Beep (without pressing) Time for pressing on Listening / Vision 2" 2"2" the pushers (e. g. 2 seconds) Repetitive actions Additional information Hand position display Replacing the battery Type: Renata CR 1632 Care and maintenance We recommend that you clean your watch regularly using a soft cloth and lukewarm water. After bathing in salt water, rinse your watch with fresh water and leave it to dry completely. Avoid exposing your watch to excessive variations in temperature or humidity, to strong sunlight or strong magnetic fields. 3 S YNCHRONISATION (1) 1" 5" Activation of the glass Using pushers and , bring the 2 hands precisely to 12 o'clock Incrementation of the minute hand (3 steps = 1 minute) Incrementation of the hour hand (3 steps = 1 minute) Validation of the setting Selecting the "Units" mode (1) Procedure allowing the digital display to be synchronised with the hands. Note: it is not necessary to perform this synchronisation operation when the digital display and the hands show the same time. D ISPLAY MODE h-m-s/date/units h-m-s date units 1" (1) (2) Activation of the glass Selecting the display mode Return to h-m-s mode (3) (1) The "h-m-s" and "date" modes remain active. (2) The "units" mode is a temporary setting mode. (3) This procedure is valid when the glass is activated for the ALTIMETER, CHRONO, COMPASS, ALARM, THERMOMETER and BAROMETER functions. 5 4 6 S ETTING THE DATE (1) or 1" 2" Activation of the glass Activation of the setting Selecting the "h-m-s" mode (eg. 8 h 34' 20'') Incrementation or decrementation by one minute Validation of the setting, the seconds restart at zero Validation of the setting, the seconds continue normally (1) (2)+ or -1 minute 1" 2" Activation of the glass Activation of the setting Incrementation or decrementation by one day Validation of the setting Selecting the "date" mode (eg. 5 July) + or -1 day (1) The calendar is semi-perpetual, that is the number of days per month is predefined. For February it is necessary to reset the date when it is only 28 days. S ETTING THE TIME (1) Accuracy: -0.3 to +0.5 seconds / day. (2) Pressing continuously on or allows continuous advance of the setting. After one complete revolution, the minute hand stops and the hour hand advances in one hour steps. 7 S ELECTING THE UNITS 1" 2" Activation of the glass Activation of the setting Validation of selections Selecting the "Units" mode Selecting "Celsius degree / meter" or "Fahrenheit degree / foot" Selecting "12" or "24" hours M ETEO Indication of the meteorological tendencies (1) 1" (2) Activation of the glass Activation of the barometer function (1) For more information, see the explanation of the barometer function on page 16. (2) The two hands indicate a tendency while the digital display gives the absolute pressure in hectoPascal (1 hectoPascal = 1 millibar). After 30 seconds, the digital display returns to "h-m-s" mode. 9 8 C HRONOGRAPH C HRONOGRAPH (SPLIT) Precise measurement of a specific duration Precise measurement of a specific duration with intermediate time 1110 1" Activation of the glass Activation of the chronograph Starting the chronograph Stopping the chronograph (eg. 10'' and 34/100) Resetting the chronograph (1) (2) 1" Activation of the glass Activation of the chronograph Starting the chronograph Displaying the interm...