Assessments - 3, GPA: 3.3 ( )

Fabricante : Armitron Arquivo Tamanho: 399.39 kb Arquivo Nome : Língua de Ensino:

2. Press ‘C’ to start timing. 3. Press ‘C’ again to stop timing. 4. Press ‘A’ to reset to zero. 5. Press ‘B’ to return to Time Telling Mode. SPLIT (LAP) OPERATION 1. While in the Chronograph Mode, press ‘C’ to start timing. 2. Press ‘A’ to measure Splits (or Laps). 3. Press ‘C’ to stop timing at the end of the event. 4. Press ‘A’ to reveal the final Split (or Lap) time. 5. Press ‘A’ again to reset to zero. 6. Press ‘B’ to return to Time Telling Mode. SETTING THE ALARM 1. From Time Telling Mode, press ‘B’ twice to enter Alarm Mode. NOTE: When the Alarm is activated, the Alarm (‘Beep Beep’) will sound for 20 seconds at preset Alarm Time or until any button is pressed. 2. Press ‘A’. Hours flash. Press ‘B’ twice. The Alarm Number flashes. Press ‘C’ to select either Alarm Time 1 (t1) or Alarm Time 2 (t2). 3. Press ‘B’. Hours flash. Press ‘C’ to advance the Hour. 4. Press ‘B’. Minutes flash. Press ‘C’ to advance the Minute. 5. Press ‘A’ to end set sequence. 6. Press ‘B’ to return to Time Telling Mode. ACTIVATING THE ALARM AND HOURLY CHIME 1. While in Alarm Mode, press ‘C’ to activate the Alarm. The Alarm symbol appears to indicate the Alarm is activated. 2. Press ‘C’ again to activate the Hourly Chime. ‘CH’ appears to indicate the Hourly Chime is activated. NOTE: When the Hourly Chime is activated, the Chime (‘Beep’) will sound every hour on the hour. 3. Press ‘C’ again to deactivate Alarm. 4. Press ‘C’ again to deactivate the Hourly Chime. 5. Press ‘B’ to return to Time Telling Mode. COUNTDOWN TIMER 1. From Time Telling Mode, press ‘B’ three times to enter the Countdown Timer Mode. 2. Press ‘A’. Hours flash. Press ‘C’ to advance the Hour. 3. Press ‘B’. Minutes flash. Press ‘C’ to advance Minutes. 4. Press ‘B’. Seconds flash. Press ‘C’ to advance Seconds. 5. When Countdown Time is set, press ‘A’ to return to Countdown Timer Mode. 6. Press ‘C’ to start Countdown timing. 7. If desired, press ‘C’ again to stop Countdown timing. Press ‘C’ again to resume Countdown timing. 8. If desired, press ‘A’ to reset the Countdown time to the preset Timer value. NOTE: During the countdown of the Timer, an alarm (‘Beep Beep’) will sound when the Seconds Digit is ‘0’ or ‘30’ if the Countdown Time is 3 Minutes or less. When the Timer counts down below ten seconds, an alarm (‘Beep’) will sound every second. When the Timer counts down to zero, an alarm (‘Beep’ ‘Beep’ ‘Beep’) will sound for 10 seconds or until any button is pressed. 9. Press ‘B’ to return to Time Telling Mode. WATER RESISTANCE This is a WATER RESISTANT watch. Do not operate the push buttons below the surface of the water. Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case. CHANGING THE BATTERY Change the battery when the watch becomes slow, the readout darkens or does not appear, or the backlight fails. Replace with one (1) CR2025 or equivalent only. This watch contains precise electronic components and should only be opened by a qualified wat...

Baixe o seu

Para fazer o download, introduza 2 dígitos :