Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Accusplit, Modelo A725MXDMT

Fabricante : Accusplit
Arquivo Tamanho: 652.32 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Now, carefully replace the back, squarely, since the back applies water resistance pressure to the gasket. Power Reset: Push L and R-Display turns OFF Release L and R-Display shows all segments ON, then displays stopwatch at 0:00.00 Left (L) Center (C) Right (R) S3 S4 S1 S2 REGISTER NOW Please copy & return this USER (not Owner) Registration to the Repair Center address on the warranty label, & we will let you know about future products. Most common use _ Telephone (optional) USER for your Model# ZIP OPERATING INSTRUCTIONS STOPWATCH ONLY Master Reset R(2sec)-Reset** Event R-Start R-Stop* (Display shows "SPLIT“) R(2sec)-Reset** Dual Split Memory with Split Counter R-Start (Shows Running DUAL Time) R-Split* (Top shows CUM 1, Bottom shows LAP 1) R-Split* (Top shows CUM 2, Bottom shows LAP 2) R-Split* (Top shows CUM 3, Bottom shows LAP 3) R-Split* (Top shows CUM 4, Bottom shows LAP 4) R(2sec)-Reset" 'Split Counter always shows Current Split Push C to return to Running Time Memory Review (before Resetting) L-Review* (Bottom shows AVE LAP Split, Top shows TOTAL ELAPSED TIME) L-Review(Shows last DUAL Split) L-Review(Shows next DUAL Split, in reverse order) '(Reviews at any time in reverse numerical order. Hold down for Rapid Review.) STOPWATCH AND SPEED/RATE (Rate=Units/time) Speed/Rate Function Setting S1(2sec) Enter Turbo (Speed/Rate) Set Function or S1 (4sec)- Enters & Reset fields to zero (as for DUAL SPLIT timing) 52-Select Select field* to be Set 53-Set Set field to Desired Setting 54-Exit Exit Setting Function ’Digit is Distance or Sample Count for Speed or Rate Computation-/ Hr(P-HR) & /Min(P-Mn). Computes in “per Hour“ or "per Minute" rate Note: Computes in "per Sec" rate if the Distance or Sample Count (Strokes, Strides, Units, etc.) is divided by 60, then entered. (Since the "input" is divided by 60, so is the output.) Speed/Rate Function Operation R-Start (Shows Running LAP Time) R-Splif (Top & Bottom show SPEED/RATE 1/LAP 1) R-Split* (Top & Bottom Show SPEED/RATE 2/LAP 2) R-Split* (Top & Bottom show SPEED/RATE 3/LAP 3) R(2sec)-Reset LAP & SPEED/RATE to zero” *For only chance to view Total Average Speed/Rate push L. Memory Review (before Resetting) L-Review* (Bottom shows AVE TOTAL SPEED/RATE, Top shows TOTAL ELAPSED TIME) L-Review* (Bottom shows AVE LAP Split) Top shows TOTAL ELAPSED TIME) L-Review (Shows last SPEED/RATE & LAP Split) L-Review (Shows next SPEED/RATE & LAP Split, in reverse order) . •(Reviews at any time in reverse numerical order. Hold down for Rapid Review.) "Reset before 30hrs. (end of range) & rollover. NO-PROOF-OF-PURCHASE LIMITED WARRANTY The warranty details are on the back of your MX Series Stopwatch. ©1997 AST # 998-287J ACCUSPLIT, Inc., 3090 Independence Drive, Suite 148, Livermore, CA 94551 USA 800-935-1996 • 925-290-1900 • FAX 925-290-1930 • • support@ACCUSPLIT.com...

Este manual também é adequado para os modelos :
Relógios - 700MX (652.32 kb)
Relógios - 790MX (652.32 kb)
Relógios - 725MX (652.32 kb)
Relógios - 740MX (652.32 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias