Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Be sure to remove the sticker before using the clock. •Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. Current time (Hour, minutes, seconds) Day of the week Current temperature Date (month - day) PM indicator Alarm time Snooze on indicator Alarm on indicator Alarm Off Snooze Alarm On SNZONOFF SET°C/°F SET°C/°F RESETINVALID RESETINVALID ILLUSTRATION GENERAL GUIDE 11111SNOOZE/LIGHT button •Press this button to illuminate the display for about five seconds. •Pressing this button while the alarm is sounding stops the alarm. 22222Alarm Mode selector SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off 33333+ / – buttons Use these buttons to change the alarm time or the setting that is flashing on the display. 44444°C/°F button Press this button to toggle the temperature units between Celsius and Fahrenheit. 55555SET button Use this button when setting the current time. 66666RESET button Press this button to reset the clock after replacing its batteries. •Buttons marked “INVALID” have no function. USING THE CLOCK 1. Press the SET button (5) to cycle through the setting screens as shown below. 12-hour/24-hour Timekeeping Screen Time Setting ScreenMonth and Day Setting Screen Year Setting Screen Normal Timekeeping Screen 2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits. •Holding down + or – changes the flashing digits at high speed. •You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with the date setting. •Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. •Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping. 3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. •The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. SET°C/°F Press + to increase the flashing digits. Press – to decrease the flashing digits. Operation Guide DQ-746 2 USING THE ALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to select the snooze alarm feature. Setting the Alarm Time Use the + and – buttons (3) to set the alarm time. Pressing the + and – buttons (3) causes the alarm time to appear in place of the date on the display. •Holding down + or – changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze feature. •The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON or SNZ. •The light also turns on for the first four seconds that the alarm sounds. •The alarm sound changes over four levels as it sounds. Stopping the Alarm •When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. •To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF. USING THE LIGHT Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark. Important! •Overuse of the light can shorten battery life. THERMOMETER FUNCTIONS •A built-in sensor measures temperature and shows the measured value on the display. •The temperature display shows “LO” for temperatures below –50°C (–58°F) and “HI” for temperatures above 70°C (158°F). •Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such readings are actually outside the guaranteed temperature range of this clock. Switching between Celsius and Fahrenheit •Push the °C/°F button (4) to select either Celsius (°C) or Fahrenheit (°F). °C/°F button (4) °C °F Celsius (°C) Fahrenheit (°F) SET°C/°F Press + to change the alarm time setting. Press – to change the alarm time setting. Alarm Mode selector OFF Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT button (1), the alarm sounds again five minutes later. •The indicator flashes on the display to indicate that the snooze feature is activated. The alarm sounds at the preset time for one minute. The alarm does not sound. SNZ ON BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove both of the old batteries. 3. Load two new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. 4. Press the RESET button (6). Be sure to press the RESET ...