Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Press the SET button (4) to cycle through the setting screens as shown below. Normal Timekeeping Screen Year Setting Screen Month and Day Setting Screen Time Setting Screen 12-hour/24-hour Timekeeping Screen 2. While the screen you want is displayed, use the + and – buttons (2 3) to change the flashing digits. • Holding down + or – changes the flashing digits at high speed. • You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance with the date setting. • Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. • Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping. 3. After making the settings you want, use the SET button (4) to display the Normal Timekeeping Screen. • The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about five minutes without performing any operation. USING THE ALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (6) to select the snooze alarm feature. Setting the Alarm Time Use the + and – buttons (2 3) to set the alarm time. Pressing the + and – buttons (2 3) causes the alarm time to appear in place of the date on the display. • Holding down + or – changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Mode selector (6) on the side of the clock to turn the alarm on and off, and to select the snooze feature. • The alarm time appears in place of the date on the display whenever the Alarm Mode selector (6) is set to ON or SNZ. • The alarm sound changes over four levels as it sounds. Stopping the Alarm • When the alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. • To turn off the snooze feature, slide the Alarm Mode selector (6) to OFF. Demo Alarm Press the DEMO button (5) to sound the alarm. USING THE LIGHT Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark. Important! • Overuse of the light can shorten battery life. USING THE FLASHLIGHT Press the Flashlight ON/OFF switch (A) to turn on the LEDs (0). Note that different batteries are used to power the clock and the flashlight. Important! • Never point the flashlight directly into anyone’s eyes. Doing so can harm vision. THERMOMETER FUNCTIONS • A built-in sensor measures temperature and shows the measured value on the display. • The temperature display shows “LL” for temperatures below –20°C and “HH” for temperatures above 50°C. • Though temperature readings are displayed up to –0.1°C and greater than 40.1°C, note that such readings are actually outside the guaranteed temperature range of this clock. BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and ...
Este manual também é adequado para os modelos :Gravadores Tempo - Clock GQ-50 (295.71 kb)