Assessments - 6, GPA: 4.2
(
)
)
|
Facilidade de uso
GENERAL GUIDE C button .... Starts and stops timing. B button .... Cycles between: Stopwatch, Timer, Alarm, Counter, Football Stopwatch, and Timekeeping Modes. A button ..... Performs lap/split and reset operation (stopwatch beeps). R button ..... Recalls lap/split time records and total elapsed time. SPLIT TIME AND LAP TIME Split time (SPLIT) is the time elapsed from the start to a specific point. Lap time (LAP) is the time elapsed from one point to another or for one lap around a track. START 1ST SPLIT 2ND SPLIT 3RD SPLIT START 1ST LAP 2ND LAP 3RD LAP USING THE STOPWATCH The stopwatch beeps to signal C and A button operations. Working range The total elapsed time and split time display is limited to 9 hours 59 minutes 59.999 seconds. Lap time display is limited to 59 minutes 59.999 seconds. Thereafter it will be reset and started again. The lap counter starts from 1 to 99 and repeats from 0. While the stopwatch is reset to all zeros, holding down the A button will toggle the lower display area between display of lap time and split time. • 100 (indicating the number of laps) will flash on the display when memory is full (100 lap times in the current group). SETTING THE CURRENT TIME AND DATE MUTE 1. In the Timekeeping Mode, hold down R for about two seconds. 2. Press C on a time signal to correct the seconds. 3. Flashing setting can be changed. Press B to move the flashing. SECONDS HOUR MINUTES YEAR DAY MONTH 4. Use C (+) and A (–) to change the flashing setting. • Holding down the C or A button scrolls at high speed. 5. Press R to exit the setting mode. * Year digits can be set up to the year 2099. 12/24-hour Timekeeping In the Timekeeping Mode, press C to toggle between 12-hour and 24-hour timekeeping. Beeper On/Off In the Timekeeping Mode, hold down the A button for about two seconds to toggle the beeper on or off. Auto Return The stopwatch returns to the Timekeeping Mode if left unused for a few minutes. USING THE TIMER Current time Number of repeats Timer number Timer start time You can set start times for up to 10 intervals, which are counted down in sequence one after the other. You can configure the timer interval sequence to repeat up to 100 times. • When the timer sequence reaches the end of the final interval, it restarts from the beginning of the first interval. Timer 1, Repeat 1 start Example: Timer 1 20'00" Timer 2 10'00" Timer 3 05'00 Repeat 2 Timer 1 end, Timer 2 start Timer 2 end, Timer 3 start Timer 2 end, Timer 3 end Timer 3 start Timer 1 end, Timer 2 start Timer 3 end, Timer 1 start To set an interval start time Reset Timer Selection Timer Interval Setting Repeat Setting 1. In the Timer Mode, hold down the R button for about 2 seconds until the displayed interval time starts to flash. 2. Use the C and A buttons to scroll through the 10 interval times until the one you want to change is displayed. • Interval timers count down in sequence from Timer 1 to Timer 10. Any timer with a starting time of 00'00" is skipped. 3. Use the B button to move the flashing between the minute and second digits. • You can specify a start time within the range of 0 to 59 minutes 59 seconds. • You can repeat steps 2 and 3 to set other interval timer start times, if you want. 4. Press the R button to move the flashing to the number of repeats settings, and then use the C (+) and A (–) buttons to change the setting to a value from 1 to 100. 5. After the number of repeats setting is the way you want, press the R button to exit the setting screen. • Holding down C or A in steps 2, 3, or 4 of the above procedure will change the setting at high speed. USING THE ALARMS You can set up to 12 alarm times. The stopwatch beeps for 10 seconds when an alarm time is reached. • Press any button to stop the beeper after it starts to sound. To turn a specific alarm on or off 1. In the Alarm Mode, use the C button to display the alarm (AL 1 to AL 12) you want. 2. Press the A button to toggle the alarm on or off. To turn all alarms off In the Alarm Mode, hold down the A button until “ALL OFF” appears on the display. This turns off all 12 alarms. To test the alarm Hold down the C button to sound the alarm. To set the alarm time 1. In the Alarm Mode, use the C button to scroll through the alarm screen (1 through 12), until the one you want to set is displayed. 2. Hold down the R button for about 2 seconds until the hour digits of the alarm time start to flash. 3. Use the B button to move the flashing between the hour and minute digits. Use the C (+) and A (–) buttons to change the currently flashing digits. 4. After the setting is the way you want, press the R button to exit the setting screen. • The alarm will not sound if the time on a flashing setting screen arrives. • The stopwatch will exit the setting screen automatically if you do not perform any operation for two or three minutes. • Displaying the setting screen for an alarm will cause that alarm to turn on. USING THE COUNTER • The stopwatch is equipped with three types of ...