Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
liquid filled objects, lighted candles). • Never place the product or any objects Read and understand all instructions before you on power cords or on other electrical use this product. If damage is caused by failure equipment. to follow the instructions, the warranty does • If the product is transpor ted in not apply. temperatures below 5°C, unpack the Risk of electric shock or fire! • Never remove the casing of the product. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. • Never inser t objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Disconnect the product from the power outlet before lightning storms. • When you disconnect the power cord, hold the plug securely, never the cable. Risk of short circuit or fire! • Before you connect the product to the power outlet, make sure that the power voltage matches the value printed on the back of the product. Never connect the product to the power outlet if the voltage is different. • Never expose the product to rain, water, sunshine, or excessive heat. • Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Risk of injury or damage to the product! • This product shall not be exposed to dripping or splashing! product and wait until its temperature matches room temperature before connecting it to the power outlet. Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. • Make sure that cur tains or other objects never cover the ventilation slots on the product. Note • The rated power voltage is printed on the back of the product.The model number and serial number are printed on the bottom. EN 2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at Introduction With this product, you can: • enjoy audio from an iPod/iPhone or external device, • charge your iPod/iPhone, • listen to FM radio stations, and • gently wake up to different alarm sources. What's in the box Check and identify the contents of the package: User Manual ORD2100 EN 3 3 Connect power Connect the power adaptor to the AC power outlet. » The product is switched to standby mode with the clock (if set) displayed. • To select a source or switch the product back to standby mode, press the knob repeatedly. • If no audio input is transferred from the iPod/iPhone or external device over 15 minutes, the product switches to standby mode automatically. EN 4 Rotate the knob to set the minute, and 4 Set the clock then press the knob to confirm. » The set clock is displayed. Tip Note • The product synchronizes its clock with iPod/iPhone • To manually set the clock, switch the product to automatically when the iPod/iPhone is docked and standby mode first. recognized. 2 sec. 1 In standby mode, press and hold SET TIME on the back of the product for two seconds. » [12H] (12-hour time format) or [24H] (24-hour time format) begins to blink. 2 Rotate the knob to select a time format, and then press the knob to confirm. » The hour digits begin to blink. 3 Rotate the knob to set the hour, and then press the knob to confirm. » The minute digits begin to blink. EN 5 Use the alarm timer Set an alarm Note • Make sure that you have set the clock correctly. You can set two alarms. 2 sec. AL1AL1AL1AL1AL1 1 Press and hold AL1/AL2 for more than two seconds to activate alarm setting mode. » The current alarm time (if set) is displayed. » The hour digits and alarm icon begin to blink. 2 Rotate the knob to set the hour. 3 Press the knob to confirm. » The minute digits blink. 4 Repeat steps 2-3 to set the minute, select an alarm source ([BUZZ], [DOCK] or [FM]), and adjust the alarm volume. » The corresponding alarm icon lights up. Note • If iPod/iPhone is selected as alarm source, but no iPod/ iPhone is connected, the device switches to buzzer instead. • The gentle wake-up function is available for [DOCK] and [FM] source. Activate/deactivate the alarmtimer 1 Press AL1 (or AL2) to view alarm settings. 2 Press AL1 (or AL2) repeatedly to select [ON] or [OFF]. • [ON]:The alarm timer is activated. • [OFF]: The alarm timer is deactivated. » AL1 (or AL2) is displayed when the alarm timer is activated. » AL1 (or AL2) disappears when the alarm timer is deactivated. Snooze the alarm When an alarm sounds, press SNOOZE. » The alarm repeats after 9 minutes. Stop the alarm When an alarm sounds, press AL1 (or...
Este manual também é adequado para os modelos :Relógios - ORD2105C/12 (659.73 kb)