Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
•• Perchlorate Material - special handling may apply. See Note •• You can only use AC power as power supply. The preinstalled lithium CR2032 battery can only back up time and alarm. For first-time use: Remove the protective tab to activate the battery. To replace the battery: CR2032 Connect power Caution •• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the unit. •• Risk of electric shock! When you unplug the power adapter, always pull the plug from the socket. Never pull the cord. •• Before connecting the power adapter, make sure that you have completed all other connections. •• Use the supplied power adapter only. Insert the power plug into the wall outlet. »»The clock radio switches to the last selected source. Switch to standby mode Press to switch the clock radio to standby mode. »»The clock (if set) is displayed on the display panel. Set time and date 1 Press and hold SET TIME on the back of your clock radio for more than two seconds. »» [12H] or [24H] begins to blink. 2 Rotate the knob to select 12/24 hour format. 3 Press the knob to confirm. » The hour digits begin to blink. 4 Repeat steps 2-3 to set hour and minute. Note • If clock is not manually set, when iPod/iPhone is connected, the unit synchronizes time from the iPod/ iPhone automatically. Tip • The accuracy of the transmitted time depends on the docked iPod/iPhone that transmits the time signal. 4 Play from iPod/ iPhone You can enjoy audio from iPod/iPhone through this clock radio. Compatible iPod/iPhone The unit suppor ts the following iPod, iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Install application 1 Press SOURCE repeatedly to select DOCK mode. 2 Inser t the iPod/iPhone into the dock. 3 For the first-time use, you will be asked to install an application in your iPod/iPhone. • Click Yes to install the application. 7 EN Play from iPod/iPhone Note • Make sure that you have installed the application in your iPod/iPhone. 1 Click home audio icon on your iPod/ iPhone. » The setting page appears. • Click setting button on the bottom right corner, and you can set the clock, sleep timer, and alarm for your clock radio. 2 Slide to previous page to play music from your iPod/iPhone. 3 Slide to the third page to reset radio stations. a Press to tune to a radio station. b Press SAVE, and then press a preset number. » SAVE and the selected preset number are activated (in blue). » The radio station is saved successfully. c If SAVE is activated, you can tune to other stations, and press a number to save stations directly. EN 8 Note • If you don't need to preset more stations, press SAVE again to make sure that the SAVE button is deactivated (in gray). 4 Slide to the following page.You can: • set the theme; • share the information; • set the location for weather repor t; • choose temperature unit; • turn on or off month/day rever t; • search for radio stations automatically by pressing Radio Auto Program (radio auto program) to activate automatic programming. » [Searching] (searching) is displayed. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. Charge the iPod/iPhone When your clock radio is connected to power, the docked iPod/iPhone begins to charge automatically. Adjust volume During play, you can rotate the knob to adjust volume. Remove the iPod/iPhone Pull the iPod/iPhone out of the dock. 9 EN 5 Listen to radio Note • Keep the unit away from other electronic devices to avoid radio interference. • For better reception, do not place iPod/iPhone into the dock when you listen to the radio. Fully extend and adjust the position of the FM aerial. Tune to FM radio stations You also can tune to radio stations from your clock radio. 1 Press SOURCE repeatedly to select FM tuner. 2 Press and hold / on the back of your clock radio for more than two seconds. » The first programmed radio station is broadcast automatically. 3 Repeat step 2 to tune to more stations. To tune to a station manually: Press / repeatedly until you find optimal reception. 6 Other features Set alarm timer Set alarm Note • Make sure that you have set the clock correctly. You can set two alarms to ring at different time. 1 Press and hold AL1/AL2 for more than two seconds to activate alarm setting mode. » The hour digits and alarm icon begin to blink. 2 Rotate the knob to set the hour. 3 press the knob to confirm. » The minute digits begin to blink. 4 Repeat steps 2-3 to set the minute, select an alarm source (buzzer, radio, or dock), and adjust the volume. Note • When alarm time comes, the selected buzzer, radio, or iPod/iPhone turns on. • You can only select the same alarm source for Alarm 1 and Alarm 2. • If iPod/iPhone is selected, but no iPod...