Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. 2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With this clock radio, you can: • enjoy the FM radio • know the time • wake up to buzz or favorite radio tone • set two alarms to ring at different time. What’s in the box Check and identify the contents of your package: • Main unit (with power adapter attached) • User manual • Quick start guide Overview of the main unit afcdebgijdkeh100l a TUNING • Tune to a radio station. b REPEAT ALARM/SLEEP OFF • Repeat the alarm. • Disable the sleep timer. c SLEEP • Set the sleep timer. d +/- • Adjust the times of clock, alarm timer and sleep timer. e AL1, AL2 • RADIO: Set the current radio station as alarm tone. • BUZ: Set buzz as alarm tone. • OFF: Turn off the alarm timer. f VOL • Adjust the volume level of radio. g Display panel h AL RESET • Stop the alarm. i RADIO ON/OFF • Turn on or off radio. j BRIGHTNESS CONTROL • Adjust the brightness of display panel. k Clock Control • SET TIME: Activate the clock time setup. • SET AL1/AL2: Activate the alarm time setup; display the set alarm time. • CLOCK: Display the clock time. l FM ANT • Attached FM radio antenna. 3 Get started Caution ••Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power Caution ••Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. ••Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. ••Before connecting the AC power cord, ensure you have completed all other connections. 1 Connect the power adapter to the power socket. Set the clock time 1 Switch Clock Control to SET TIME. 2 Press +/- to set the time (24-hour system). 3 Switch Clock Control to CLOCK. Tip ••Press and hold + to fast increase the time digits. ••Press - to decrease the time digits one by one. 4 Listen to radio Tune to a radio station 1 Press RADIO ON/OFF to turn on the radio. 2 Adjust TUNING slowly to tune to a radio station. • To turn off the radio, press RADIO ON/OFF again. Adjust the volume level 1 Rotate VOL clockwise or anti-clockwise. 5 Set the alarm timer Set the alarm time You can set two separate alarms. For the alarm tone, you can select the buzz or the FM radio. Note ••Before you start, ensure that the time is set correctly. 1 Switch Clock Control to AL1 or AL2 (on SET AL1/AL2). 2 Press +/- to set the alarm time. 3 Switch Clock Control to CLOCK. Turn on the alarm timer Note ••Ensure the alarm time is set successfully. 1 Switch AL1/AL2 to BUZ or RADIO. »»/ appears. »»The buzz or FM radio is set for alarm tone. View the alarm time 1 Switch Clock Control to AL1 or AL2 (on SET AL1/AL2). »» or appears. »»The preset alarm time is displayed. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/SLEEP OFF. »»The alarm repeats ringing 7 minutes later. Stop alarm ring 1 When the alarm rings, press AL RESET. »»The alarm stops but the alarm settings remain. Turn off the alarm timer 1 Switch AL1/AL2 to OFF. »»/ disappears. 6 Other features Set the sleep timer You can set the clock radio to turn off automatically after a certain period of time (0 to 59 minutes). Note ••Before the setup, ensure Clock Control is switched to CLOCK and the radio is turned off. 1 Press and hold SLEEP. »»The time digits count down from 0:59 to 0:00. »»The radio turns on. 2 Press +/- repeatedly to adjust the time. 3 Release SLEEP when the desired time digits are displayed. To turn off the sleep timer: 1 Press REPEAT ALARM/SLEEP OFF. Adjust display brightness 1 Switch BRIGHTNESS CONTROL to HI or LO. • HI: For higher brightness • LO: For lower brightness 7 Product information Note ••Product information is subject to change without prior notice. Specifications Tuner (FM) Tuning Range 87.5 - 108 MHz Sensitivity - Mono, 26dB S/N Ratio < 22 dBf Total Harmonic Distortion < 3% Signal to Noise Ratio > 50 dB General information AC Power Input: 100-240V~ 50/60Hz 0.25MAX Output: 5VDC, 500mA Operation Power Consumption 3 W Dimensions - Main Unit (W x H x D) 185 x 85 x 52 mm Weight - Main Unit 0.37 kg 8 Troubleshooting Caution ••Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting ser...