Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
• This watch does not have a time zone that corresponds to the Greenwich Mean Time differential of –3.5 hours. Because of this, the radio-controlled timekeeping and World Time functions will not display the correct time for Newfoundland, Canada. Expose the watch to bright light to charge its battery before using it. You can use this watch even as its battery is being charged by exposure to bright light. • Be sure to read “Battery” of this manual for important information you need to know when exposing the watch to bright light. If the display of the watch is blank... If the sleep indicator (S /SLEEP ) is on the display, it means that the display is blank because the watch’s Power Saving function has shut it to conserve power. Power Saving automatically turns off the display and enters a sleep state whenever your watch is left in an area where it is dark for a certain period. • The initial factory default setting is Power Saving on. • The watch recovers from the sleep state if you move it to a well-lit area*, if you press any button, or if you angle the watch towards your face for reading. * It can take up to two seconds for the display to turn on. • See “Power Saving Function” for more information. Sleep indicator General Guide • Press C to change from mode to mode. • In any mode, press L to illuminate the display. Stopwatch Mode Timekeeping Mode Alarm Mode Press C. World Time Mode Time Recorder Mode Radio-controlled Atomic Timekeeping This watch receives a time calibration signal and updates its time setting accordingly. The time calibration signal includes both Standard Time and Daylight Saving Time (summer time) data. • This watch is designed to pick up the time calibration signal transmitted from Fort Collins, Colorado (USA). Reception is possible within North America*. * The term “North America” in this User’s Guide refers to the area that consists of Canada, the continental United States, and Mexico. Current Time Setting This watch automatically adjusts its time setting in accordance with a time calibration signal. You can also perform a manual procedure to set the time and date, when necessary. • The first thing you should do after purchasing this watch is to set your Home City, which is the city where you will normally use the watch. For more information, see “To set your Home City” below. • When using the watch outside of the range of the transmitter in Fort Collins, you need to manually adjust the time as required. See “Timekeeping” for information about manual settings. To set your Home City 1. In the Timekeeping Mode, hold down A until the city code starts to flash, which indicates the setting screen. 2. Use D(east) and B(west) to select the city code you want to use as your Home City. • The following are the city codes for major cities in North America. LAX(P (Pacific) indicator): Los Angeles, San Francisco, Las Vegas, Seattle, Vancouver, Tijuana DEN(M (Mountain) indicator): Denver, El Paso, Edmonton, Culiacan CHI(C (Central) indicator): Chicago, Houston, Dallas/Fort Worth, New Orleans, Winnipeg, Mexico City NYC(E (Eastern) indicator): New York, Detroit, Miami, Boston, Montreal • Note that this watch does not have a city code that corresponds to Newfoundland. 3. Press A twice to exit the setting screen. • The first press of A displays the 12/24-hour setting screen. Pressing A again exits the setting screen. Important! • Normally, your watch should show the correct time as soon as you select your Home City code. If it does not, it should adjust automatically after the next auto receive operation (in the middle of the night). You can also perform manual receive or you can set the time manually. • If you are in an area that does not use Daylight Saving Time (summer time), turn off the DST setting. Time Calibration Signal Reception There are two different methods you can use to receive the time calibration signal: auto receive and manual receive. Day of week Month – Day Hour : Minutes Seconds PM indicator City code E/C/M/P indicator • Auto Receive With auto receive, the watch automatically picks up the time calibration signal four times a day at 2:00 a.m., 3:00 a.m., 4:00 a.m., and 5:00 a.m. For more information, see “About Auto Receive”. • Manual Receive Manual receive lets you start a time calibration receive operation with the press of a button. For more information, see “To perform manual receive”. Important! • When getting ready to receive the time calibration signal, position the watch as shown in the nearby illustration, with its 12 o’clock side facing towards a window. Make sure there are no metal objects nearby. Resin Band Metal Band Inside or among buildings Inside a vehicle Near household appliances or office equipment, or a mobile phone Near a construction site, airport, or other sources of electrical noise Near hightension power lines Among or behind mountains • The watch should not be on its side or facing the wrong way. • Proper signal reception can be difficult or even impossib...
Este manual também é adequado para os modelos :Relógios - 2638 (793.01 kb)
Relógios - 2688 (793.01 kb)