Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
If it has, please fit it into the hexagonal hole in the retainer so that the rounded side of the lock nut faces out. 6 Shown Actual Size • Fit a retainer with lock nut onto the end of the screw and to the inside of a side rail. • Tighten the screw with a Phillips screwdriver.Do not over-tighten. • Repeat this procedure to fasten the screw in the other end of the front tube and side rail, using the remaining retainer with lock nut. Rounded Side M4 Lock Nut - 2 (Inside Retainer) Retainer with Lock Nut 6 Assembly • Turn the hardboard over and insert it into the slot in the front edge of the pad. • Fasten the pad buckles on the front edge of the pad and underneath the seat.Make sure you hear a “snap” on both sides. • Press the fasteners together in the seat back portion of the pad. Assembly is now complete. 9 Pad Buckles • Turn the assembly upright. • Fit the upper pocket on the pad onto the seat back tube. • Fasten the pad buckles around each side rail. 8 Pad Pad Slot Press Seat Back Hardboard Seat Back Tube Pad Buckles Side Rail 7 • Locate the battery compartment on the bottom of the vibrations unit. • Loosen the screw in the battery compartment door with a Phillips screwdriver. • Lift to remove the battery compartment door. • Insert one “D” (LR20) alkaline battery as indicated inside the battery compartment. • Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten. Battery Installation Battery Compartment Hint: We recommend using an alkaline battery for longer battery life. Battery Tips 1.5V “D” (LR20) SHOWN ACTUAL SIZE + – • Remove the battery during long periods of non-use. Always remove an exhausted battery from the product. Battery leakage and corrosion can damage this product. Dispose of the battery safely. • Do not dispose of the battery in a fire. The battery may explode or leak. • Do not dispose of the musical toy in a fire. The battery(ies) inside the toy may explode or leak. • Never short circuit the battery terminals. • A non-rechargeable battery should not to be recharged. • Only a battery of the same or equivalent type as recommended in the “Battery Installation” instructions is to be used. • If a removable rechargeable battery is used, it is only to be charged under adult supervision. • A rechargeable battery is to be removed from the product before it is charged. • If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired. 7 • Locate the battery compartment on the bottom of the vibrations unit. • Loosen the screw in the battery compartment door with a Phillips screwdriver. • Lift to remove the battery compartment door. • Insert one “D” (LR20) alkaline battery as indicated inside the battery compartment. • Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten. Battery Installation Battery Compartment Hint: We recommend using an alkaline battery for longer battery life. Battery Tips 1.5V “D” (LR20) SHOWN ACTUAL SIZE + – • Remove the battery during long periods of non-use. Always remove an exhausted battery from the product. Battery leakage and corrosion can damage this product. Dispose of the battery safely. • Do not dispose of the battery in a fire. The battery may explode or leak. • Do not dispose of the musical toy in a fire. The battery(ies) inside the toy may explode or leak. • Never short circuit the battery terminals. • A non-rechargeable battery should not to be recharged. • Only a battery of the same or equivalent type as recommended in the “Battery Installation” instructions is to be used. • If a removable rechargeable battery is used, it is only to be charged under adult supervision. • A rechargeable battery is to be removed from the product before it is charged. • If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired. 8 Securing your Infant • Place your child in the seat. Position the restraint pad between your child’s legs. • Fasten the restraint belts to each side of the restraint pad. Make sure you hear a “click” on both sides. • Check to be sure the restraint system is securely attached by pulling it away from your child. The restraint system should remain attached. Restraint Pad Restraint Belt Restraint Belt To prevent serious injury and/or falls: • Always use the restraint until child is able to climb in and out of the chair unassisted. • Never use on any elevated surface. • Never leave child unattended. WARNING 2 Recline Set-Up & Use Select a seat position for your child’s comfort: Upright or Recline. Upright While pressing the button on each side rail, lift the seat back. Recline While pressing the button on each side rail, lower the seat back. IMPORTANT! Before each use, inspect this product for damaged...