Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
3 Francais........................ 8 Espanol....................... 13 Deutsch...................... 18 Nederlands.............. 23 Italiano........................ 28 Portugues................. 33 .........................38 Svenska ..................... 43 Dansk........................... 48 Norsk............................ 53 Suomi.......................... 58 2 Instructions for use Introduction Congratulations on your purchase of the Philips Baby Bottle Warmer. The Philips Baby Bottle Warmer is designed to heat food quickly and to keep it warm. It is fitted with a new temperature control system (PTC) that meets the highest safety requirements. The click-step control knob allows you to always set the correct food temperature. Thanks to its unique design the Philips Baby Bottle Warmer fits all bottles and jars of baby food. The Philips Baby Bottle Warmer is a high-performance product that warms both bottles and jars of baby food, and belongs to a complete range of Philips Baby-Care products. Philips Baby-Care, Taking Care Together! These instructions for use are applicable for two Philips Baby Bottle Warmer models: Model SBC SC205; For use at home. Model SBC SC215; For use at home and in the car (with extra car adapter). Note: Please read these instructions carefully and retain for future reference. 8 1 2 3 4 0 5 6 7 8 9 7 6 22 9 1 4 3 5 1 Bottle and jar lifter 2 Hand grips 3 Mains plug 4 Click-step control knob 5 Indicator lamp 6 Rim 7 Container 8 Cable reservoir 9 Car adapter 3 Instructions for use Installation For use at home Before connecting the Baby Bottle Warmer to the mains, check to ensure that the mains outlet is 230V AC. 1. Place the Baby Bottle Warmer out of the reach of children and on a dry, non-slip, horizontal surface. 2. Turn the click-step control knob 4 to the " " position. 3. Unreel the required cable length from the cable reservoir 8 and plug into the mains outlet. For use in the car 1. Place the Baby Bottle Warmer out of the reach of children and on a dry, non-slip horizontal surface. 2. Turn the click-step control knob 4 to the " " position. 3. Connect the car adapter 9 to the mains plug 3. 4. Unreel the required length of cable from the cable reservoir 8 and connect the car adapter to the cigarette lighter socket of the car. (12V DC). Notes: – Never use the Baby Bottle Warmer when the car is in motion. – Never use the Baby Bottle Warmer without water in it. – Only use the Baby Bottle Warmer when the ambient temperature is between +7°C and +37°C. Caution: Change the water in the bottle warmer often for hygienic reasons. Operation Warming of baby bottles 1. Turn the click-step control knob 4 to the " " position. 2. Place the bottle in the container 7 and fill the space between the bottle and the inner container with water up to two centimetres from the rim 6. For smaller bottles fill up to just above the milk line in the bottle. 3. Set the required temperature using the click-step control knob. – The indicator lamp lights to indicate the heating operation. 4 Instructions for use – After approximately 8 minutes the milk will have reached just the right temperature for your baby. The indicator lamp goes out. The indicator lamp then switches on and off intermittently to indicate the thermostat is controlling the temperature of the water. 4. Remove the bottle from the container and turn the control knob to the " " position. 5. Shake the bottle a little to distribute the heat evenly before you allow your baby to drink. Notes: – Always check that the contents of the bottle are at the correct temperature by pouring a few drops on the back of your hand. – The heating of baby food depends not only on the temperature setting but also on the initial temperature of the food and water, the wall thickness of the glass and the amount and consistency of the food. The symbol "BOTTLE" is an indication for rapid warming up. After a short while you will find the best setting to obtain the ideal temperature for your baby’s food. Our information is based on warming 200ml milk from 20°C up to 37 .C. Warming of baby food jars 1. Remove the label and lid from the jar. 2. Turn the click-step control knob 4 to the " " position. 3. Place the jar in the container 7 using the lifter and fill the space between the jar and the inner container with water up to two centimetres from the rim 6. For small jars fill-up to just below the top of the jar. 4. Set the click-step control knob to the "jar" symbol. – The indicator lamp lights to indicate that the thermostat is working. 5. Use the lifter to stir the contents of the jar frequently for more rapid distribution of heat. – After approximately 12-15 minutes (depending on the consistency of food) the food will have reached just the right temperature for your baby. The indicator lamp goes out. 6. Remove the jar from the container and turn the control knob to the " " position. Note: Always check that the contents of the jar are at the correct temperature, by testing some...