Assessments - 4, GPA: 3
(
)
)
|
Facilidade de uso
NOT SUITABLE FOR CHILDREN UNDER THREE YEARS OF AGE DUE TO SMALL PARTS/CHOKING HAZARD. WARNING Read and understand operator's manual before using this unit. Failure to follow operating instructions could result in injury or damage to property. REQUIRED TOOLS AND MATERIALS: • Phillips Head Screwdriver Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339, For Europe: 00 800 555 85234 (Sweden: 009 555 85234), For Australia: 1-800-333 061 Internet Address: 1 07/03 P/N 211737A © COPYRIGHT 2000 by HUFFY SPORTS IMPORTANT! Remove all contents from boxes. SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly. • Seat the pole sections properly (if applicable). Failure to do so could allow the pole sections to seperate during play and/or during transport of the system. • Climate, corrosion or misuse could result in system failure. • If technical assistance is required, contact Huffy Sports. Most injuries are caused by misuse and/or not following instructions. Use caution when using this unit. 2 P/N 211737A 07/03 Get to know the basic parts of your basketball system..... SUPPORT TUBE TARP MINI BASKETBALLS SUPPORT TUBES BACKBOARD RIM NETTING 3 07/03 P/N 211737A P/N 211737A 07/03 4 PARTS LIST AND IDENTIFIER Item Qty Part No Description 1 2 202250 Support Pipe, Curved 2 2 202251 Support Pipe, Curved 3 3 202252 Threaded Stabelizer Pipe, Straight 4 4 202253 Support Pipe, White, Plastic 5 2 202254 Support Pipe, Straight 6 1 202255 Upper U-Pipe 7 1 202256 Lower U-Pipe, Angled Connectors 8 1 202257 Net 9 1 202258 Rim 10 1 202259 Tarp Item Qty Part No Description 11 1 202260 Rim Bracket 12 2 202261 Adapter, White, Plastic 13 2 202262 Washer 14 2 202263 Shim Bracket, Threaded 15 2 202264 Wing Nut, Plastic 16 2 202265 Screw, 1-3/4" 17 6 202266 Screw, 1-3/8" 18 4 202267 Screw, 1/2" 19 1 202268 Backboard 20 2 202269 Mini Basketball 21 2 202298 Board Bracket with Hook Item #12 (2) Item #11 (1) Item #7 (1) Item #6 (1) Item #1 (2) Item #2 (2) Item #3 (3) Item #5 (2) Item #4 (4) Item #8 (1) Item #10 (1) HARDWARE ID (ACTUAL SIZE) Item #9 (1) Item #19 (1) Item #20 (2) Item #17 (6) Item #18 (4) Item #16 (2) Item #13 (2) Item #14 (2) Item #15 (2) Item #21 (1) TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (actual size) Phillips-Head Screwdriver SECTION A: ASSEMBLE THE STAND AND TARP 1. Attach lower U-pipe (7) to curved support pipes (1). 1 1 7 Item #17 (6) 1. Attach lower U-pipe (7) to curved support pipes (1). 1 1 7 Item #17 (6) 2. Slide sleeve of the tarp (10) over stabelizer pipe (3) and secure by connecting stablizer pipe (3) to lower U-pipe with screws (17). 17 07/03 P/N 211737A5 17 10 1 7 3 3 3. Slide curved support pipe (2) over curved support pipe (1) NOTE: Locking pins on curved support pipe (2) MUST be facing inward (toward eachother). 2 2 10 1 1 3. Slide curved support pipe (2) over curved support pipe (1) NOTE: Locking pins on curved support pipe (2) MUST be facing inward (toward eachother). 2 2 10 1 1 4. Connect threaded stablelizer pipe (3) using screws (17). 23 10 17 17 1 1 6 P/N 211737A 07/03 5. Attach straight bars (5) by snapping them over the pins of curved support pipes (2). 5 5 2 10 2 6. Connect threaded stablelizer pipe (3) using screws (17). 17 17 5 5 3 7 07/03 P/N 211737A 7. Slide upper U-pipe (6) over straight pipes (5). NOTE: Locking pins on pipe (5) MUST snap into holes of upper U-pipe (6). See FIG. A. FIG A. 6 5 6 5 8. Connect white, plastic pipes (4) together with plastic adapter (12). NOTE: Keep pins of each pipe aligned. 44 44 12 12 8 P/N 211737A 07/03 9. 9. Slide white pipe assembly through sleeve of tarp (10) and snap it into opening on lower U-pipe (7). See FIG. A. NOTE: Locking pins on pipe (4) MUST snap into holes of U-pipe (7). 4 4 1210 FIG A. 7 4 10 7 Snap white pipe assembly into opening in upper U-pipe (6). 10. NOTE: Locking pins on white pipe (4) MUST snap into holes of upper U-pipe (6). 10 6 4 9 07/03 P/N 211737A SECTION B: ASSEMBLE THE BOARD AND RIM TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (actual size) Phillips-Head Screwdriver Item #18 (4) Item #16 (2) Item #13 (2) Item #15 (2) 1 OUTSIDE VIEW 2 3 4 11. Install net (8) to rim (9). 9 8 Item #8 (1) Item #9 (1) 12. Position rim bracket (11) inside welded bracket extending from ring of the rim (9). 19 9 11 10 P/N 211737A 07/03 Attach rim (9) to board (19) using screws (18), rim bracket (11) and threaded reinforcement 13. brackets (14). NOTE: Rim ...