Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood. If you have any questions about this product, or are missing a part, please call Fisher-Price® toll-free at 1-800-432-KIDS, rather than return this product to the store. Age: 2-5 years. Weight Limit: 55 lbs. • Adult supervision is required. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. • Observe child weight limit: maximum 55 lbs. WARNING Please keep small parts, hardware and plastic bags out of children’s reach. Dispose of plastic bags properly. CAUTION Parts Parts • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Wipe each part with a clean dry cloth before assembly. • If you are missing a part, please call Fisher-Price® toll-free at 1-800-432-KIDS rather than return this product to the store. (ALL SHOWN ACTUAL SIZE) #8 x 5/8 " Screw - 6 #8 x 11/4 " Screw - 6 Lock Washer - 2 3 4 6 8 9 11 17 1 7 2 12 14 10 15 16 13 5 22 21 1819 20 22 21 21 Cap Nut - 2 23 Illustration Number Part Description Quantity 1 Frame 1 2 Rear Wheel 2 3 Rear Wheel Cover 2 4 Rear Axle 1 5 Seat 1 6 Booster Seat 1 7 Tank 1 8 Key Console 1 9 Handlebar 1 10 Frame Cover 1 11 Fork 1 12 Fender 1 Illustration Number Part Description Quantity 22 13 Front Wheel 1 14 Front Wheel Cover 2 15 Pedal Hub 2 16 Front Axle 1 17 Front Axle Cover 2 18 Pedal 2 19 Lock Washer 2 20 Cap Nut 2 21 #8 x 11/4" Screw 6 22 #8 x 5/8" Screw 6 23 Cap Nut Assembly Tool 3 Label Sheet (not shown) 1 2 Assembly Assembly IMPORTANT! Remove the cap nut assembly tools from the rear axle and save them. The cap nut assembly tools will be used for assembly steps - and then discarded when the rear wheel assembly is complete. • Place the other rear wheel onto the rear axle with the recessed side facing up. • Place a cap nut into a cap nut assembly tool. • Place the cap nut with cap nut assembly tool onto the end of the rear axle and tap with a hammer until secure. • Remove both cap nut assembly tools and dispose of them properly. Rear Axle Cap Nut Cap Nut Assembly Tool Scrap Block of Wood • Place a scrap block of wood on a flat surface. • Fit a cap nut into a cap nut assembly tool. •Insert one end of the rear axle into a cap nut. •Tap the end of the rear axle with a hammer. Make sure the cap nut is securely attached to the rear axle. Axle Holes Cap Nut Assembly Tool • Turn the frame on its side. • Insert the rear axle through the four axle holes in the rear of the frame. Frame Rear Wheel Recessed Side Cap Nut Assembly Tool • Place a rear wheel onto the rear axle with the recessed side facing down toward the cap nut assembly tool. 3 • Insert a lock washer into the pedal slot. Make sure the raised tabs on the lock washer are facing the closed, or outside end of the pedal. • Repeat this procedure to fit the other lock washer into the other pedal. Outside End of Pedal Pedal Slot Raised Tabs • Snap a rear wheel cover into the recessed area in each rear wheel. • Fit the slots in the pedal hubs onto the metal tabs on the front axle. • Snap the pedal hubs together securely. • Slide the front wheel cover onto one end of the front axle so that the pedal hub fits into the square recessed area inside the front wheel cover. • Insert the front axle assembly into the front wheel. Make sure the two posts on the front wheel cover fit into the corners of the square opening in the front wheel. • Slide the other front wheel cover onto the front axle assembly. Align the posts on the front wheel cover with the holes in the front axle assembly. • Insert two 11/4" screws into each front wheel cover. Tighten the screws with a Phillips screwdriver. Do not over-tighten. Metal Tab 4 Assembly Rear Wheel Cover Front Axle Pedal Hubs Post Front Axle Front Wheel Cover Front Axle Assembly Front Wheel Post Front Wheel Cover Lock Washer Pedal Hub Front Wheel Cover • Place a scrap block of wood under the front wheel assembly. • Fit a pedal onto one end of the front axle. • With the lock washer centered over the front axle end, tap the pedal until it is secure. • Repeat this procedure to attach the other pedal to the other end of the front axle. • Position the fender between the fork arms, so that the pointed end of the fender is facing up and the grooves on the fork are facing down. • Insert one 5/8" screw through the fender and into the fork. Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Place the front wheel assembly between the fork arms so the front axle rests in the groove on each fork arm. • Fit a front axle cover on the front axle on one fork arm. • Insert two 5/8" screws through the front axle cover and into the fork. Tighten the screws with a Phillips screwdriver. Do not over-tighten. • Repeat this procedure...
Este manual também é adequado para os modelos :Brinquedos para crianças - TOUGH TRIKE 72644 (446.89 kb)