Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
Attach the front wheel by loosening the wheel’s Quick Release (Q/R) lever wheel’s Q/R lever in open position, hand tighten the cone nut until almost tight, then flip wheel’s Q/R lever backward to the closed position to lock wheel in wheel’s Q/R lever in open position, hand tighten the cone nut until almost tight,s Q/R lever in open position, hand tighten the cone nut until almost tight, place. Note this step may require minor adjustment until the Q/R lever flips back then flip wheel’s Q/R lever backward to the closed position to lock wheel inip wheel’s Q/R lever backward to the closed position to lock wheel in with firm pressure. Pull outward on wheel to ensure it is locked in place. place. Note this step may require minor adjustment until the Q/R lever flips backplace. Note this step may require minor adjustment until the Q/R lever flips back Front Wheel Assembly Caution: The interior jam nuts are factory installed and do not need adjustment. Close the front caliper brake by lowering the Q/R lever. Spin the front wheel to make sure the brake pads do not rub and are properly aligned to the rim. If Close the front caliper brake by lowering the Q/R lever. Spin the front wheelClose the front caliper brake by lowering the Q/R lever. Spin the front wheel brake pad alignment is off, loosen brake pad nut with an adjustable wrench, to make sure the brake pads do not rub and are properly aligned to the rim. Ifto make sure the brake pads do not rub and are properly aligned to the rim. If align brake pad and retighten nut while holding brake pad in place. Caution: Always be sure to reengage the brake by rotating the Q/R lever for- ward (toward the front wheel) before using the stroller. Always be sure to reengage the brake by rotating the Q/R lever for-Always be sure to reengage the brake by rotating the Q/R lever for Rear Wheel Assembly Grasp rear wheel in on Grasp rear wheel in onGrasp rear wheel in one hand, slide wheel’s axle into hole in rear of frame. Grasp rear wheel in on Push up on the axle release lever so that the wheel is fully inser Push up on the axle release lever so that the wheel is fully inserPush up on the axle release lever so that the wheel is fully inserted. Pull the ted. Pull theted. Pull the Push up on the axle release lever so that the wheel is fully inser wheel fi wheel fiwheel fir rrmly mlymly, the wheel should not come off if fully inser , the wheel should not come off if fully inser, the wheel should not come off if fully inserted/locked. Repeat for ted/locked. Repeat forted/locked. Repeat for mly, the wheel should not come off if fully inserted/locked. Repeat for other side. To release wheel push up on axle release lever and pull off wheel. IMPORTANT If you notice that the stroller steers to one direction you may need to adjust the If you notice that the stroller steers to one direction you may need to adjust theIf you notice that the stroller steers to one direction you may need to adjust the If you notice that the stroller steers to one direction you may need to adjust the front wheel to align it. To do so loosen the front axle Q/R lever, points the front wheel in the opposite direction the stroller is veering, and wheel in the opposite direction the stroller is veering, andwheel in the opposite direction the stroller is veering, and retighten the Q/R lever retighten the Q/R leverretighten the Q/R lever. .. wheel in the opposite direction the stroller is veering, and retighten the Q/R lever If you need help making this adjustment, please call our Customer Ser If you need help making this adjustment, please call our Customer SerIf you need help making this adjustment, please call our Customer Service vicevice If you need help making this adjustment, please call our Customer Ser department for assistance. o recline seat o fully recline, unhook buckle on back of the seat.To adjust the recline position; adjust the slide on the strap to the desired length. WARNING: Child may slip into leg openings and strangle. Never use in a reclined carriage position unless T-shield and shoulder strap have been readjusted to the new seat position. Storage and folding WARNING: Always remove child from stroller before folding Front Fender Assembly Insert the #8 – 1.5" screws into the holes located on the front supporthe wheel. Align the holes on the bottom side of the fender with the screws and Insert the #8 – 1.5" screws into the holes located on the front support the #8 – 1.5" screws into the holes located on the front suppor tighten with a Phillips screwdriver. Parent Console Attachment (not included with KS107) The parent console will attach to the handle by snapping it in place on the handle and above the canopy Tether/Wrist Strap Attachment Operating Instructions Run Around™ & Run Around™ LTD 11-KS107, 11-KS186, 11-KS187...page 3 o fully recline, unhook buckle on back of the seat.To adjust the recline position; adjust the slide on the strap to the desired length. WARNING: Child may slip into leg openin...
Este manual também é adequado para os modelos :Carrinhos de bebé - 11-KS107 (457.86 kb)
Carrinhos de bebé - 11-KS187 (457.86 kb)