Every effort has been made to ensure your purchase is of top quality and proven design, ready to provide you with many years and miles of happy, safe trailering. Please go to or contact us at burley@burley.com to register your warranty information. IMPORTANT IT IS VERY IMPORTANT FOR YOU TO FAMILIARIZE YOURSELF WITH YOUR BURLEY BY READING THIS ENTIRE MANUAL BEFORE USE. IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT YOUR AUTHORIZED BURLEY DEALER. Introduction Once you’ve done the initial assembly and r

Please go to or contact us at (541) 687-1644 or burley@burley.com to register your warranty information. Safety Guidelines 1. Consult your child trailer manual for trailer safety guidelines. 2. Always use the handle bar tether. 3. When placing children or cargo into the trailer, keep the load centered and in front of the axle. 4. Always set the parking brake before releasing the handle. Make sure the parking brake is properly adjusted and working before use, especially after changing the tires o

8. Instruct children not to bounce or lean, as a weight shift could cause the trailer to tip over. 9. To protect children from flying debris, always use your cover. Never leave children unattended. Check children frequently, especially during hot or cold weather. 10. Observe recommended speed limits: a maximum of 15 mph (24 km/h) on smooth, straight roads and 5 mph (8 km/h) or less when turning or on uneven roads. 11. Set your parking brake before removing your children or cargo. 12. Never pull

Table of Contents Page I. Introduction 2 II. Preparation for Installation 3 III. Handlebar Installation 3 IV. Using the Handle 6 V. Mount Wheel Assembly 7 VI. Using the Walk ‘n Roller Wheel 9 VII. Installing the Brake 9 VIII. Safety Guidelines 11 IX. Maintenance 12 Warranty 12 Pre-2004 d’Lite, Lite & Pre-2005 Encore Handlebar & Stroller Wheel Supplement To be used in conjunction with 2003 or previous model year Burley trailer Owner’s Instruction & Safety Manual. Table of Contents Page I. Introdu

• Save the hitch and the d-ring (#3) for reinstallation. The locking nut (#5) and the bolt (#1) can be discarded. A longer bolt is provided for the next step. Always check the handle attachment before using. Be sure that handle is properly installed with buttons protruding in the locked position. Failure to do this could lead to loosening of handle, loss of control, and serious injury. 3 1 2 5 4 8 Burley Walk ‘n Roller Manual; models 2003 and earlier Re-Assembly with the Pivot Wheel • Slide the