Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
14-1045reimage.fm Page 2 Friday, January 12, 2001 3:56 PM ¶ Contents Features ................................................... 3 A Quick Look at Your Recorder ............. 4 Preparation .............................................. 5 Connecting Power ............................. 5 Using Batteries .......................... 5 Using AC or DC Power .............. 6 Connecting an Earphone .................. 8 Operation ............................................... 10 Loading a Microcassette Tape ........ 10 Recording ........................................ 11 Using an External Microphone .............................. 14 Playing a Tape ................................. 14 Using FAST-F and REWIND .................................. 15 Quick Record .................................. 15 Using the Tape Counter .................. 15 Tape Tips ............................................... 16 Storing Cassette Tapes ................... 16 Preventing Accidental Erasure ........ 16 Erasing a Cassette Tape ................. 17 Care ........................................................ 17 Cleaning the Tape-Handling Parts ........................ 17 Specifications ....................................... 19 © 2001 RadioShack Corporation. All Rights Reserved. RadioShack, RadioShack.com and Adaptapluga are registered trademarks used by RadioShack Corporation. 2 Contents 14-1045reimage.fm Page 3 Friday, January 12, 2001 3:56 PM ¶ Features Your RadioShack MICRO-33 Voice-Activated Microcassette Tape Recorder is ideal for quick note-taking. Its compact size makes it easy to slip into a pocket or briefcase. You can use it at school, at business conferences, for dictation in the office, or anywhere on the go! Voice-Actuated Circuitry (VOX) — begins recording when the recorder picks up sound and stops a few seconds after the sound stops. External Microphone Jack — lets you use an external microphone, so you can extend your recording range. Fast Play — lets you play a tape back about 30% faster than normal speed, to save time when listening to a tape. Features 3 4 A Quick Look at Your Recorder . A Quick Look at Your Recorder RECORD PLAY STOP/ EJECT SPEED REWIND FAST-F MIC EAR DC3V Battery Compartment VOL/VOX REC/ BATT Tape Counter VOX IN F-PLAY/OFF/PAUSE 14-1045reimage.fm Page 4 Friday, January 12, 2001 3:56 PM 14-1045reimage.fm Page 5 Friday, January 12, 2001 3:56 PM ¶ Preparation CONNECTING POWER You can power your recorder from internal battery power, AC power (with an optional AC adapter), or your vehicle’s battery (with an optional DC adapter). Using Batteries You can use two AAA batteries (not supplied) to power your recorder. For the best performance and longest life, we recommend RadioShack alkaline batteries. Warning: Dispose of old batteries promptly and properly. Do not burn or bury them. Cautions: • Use only fresh batteries of the required size and recommended type. • Do not use rechargeable batteries in the recorder. • Do not mix old and new batteries or different types of batteries (standard or alkaline). Preparation 5 14-1045reimage.fm Page 6 Friday, January 12, 2001 3:56 PM • If you do not plan to use the recorder with batteries for several days or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. When the REC/BATT indicator does not light, lights dimly during manual recording, or the recorder stops operating properly, replace the batteries. 1. Slide the battery compartment cover in the direction of the arrow until it stops, then lift up the cover. Caution: The battery compartment cover is attached to the recorder. Do not try to remove it. 2. Insert the batteries into the compartment as indicated by the polarity symbols (+ and –) marked on the back of the recorder. 3. To close the battery compartment cover, hold the cover down against the recorder and slide it in the opposite direction of the arrow. Using AC or DC Power To power the recorder from an AC outlet or your vehicles battery power, you need 6 Preparation 14-1045reimage.fm Page 7 Friday, January 12, 2001 3:56 PM an AC or DC adapter and an Adaptapluga (neither supplied, available at your local RadioShack store). Cautions: ! You must use a (Class 2 for AC) power source that supplies 3 volts DC power and delivers at least 200 mA. The center tip of the Adaptaplug must be set to positive, and the plug must properly fit the recorder’s DC3V jack. Using an AC adapter and plug that do not meet these specifications could damage the recorder, the adapter, or the plug. • Always connect the adapter to the recorder before you plug it into the power source, and unplug the adapter from the power source before you unplug it from the recorder. 1. If necessary, set the adapter’s voltage switch to 3V. 2. Attach the Adaptaplug to the adapter’s cord with the tip set to positive (+). Caution: Be sure to set the tip polarity to positive (+). If the polarity is Preparation 7 14-1045reimage.fm Page 8 Friday, January 12, 2001 3:56 PM...