Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
• Do not leave any rubber or vinyl on the machine for an extended period of time, otherwise the machine may be stained. • Do not touch the print head mechanism. If the head is touched, clean it immediately with a soft wipe (e.g. a cotton swab) to avoid permanent damage. • To avoid injuries, do not touch the cutter's edge. • Use only the AC adapter designed exclusively for this machine. Use of any other adapter may void the warranty. SPECIFICATIONS Dimensions: 4.32" (W) . 7.84" (D) . 2.2" (H) (108mm (W) . 196mm (D) . 55mm (H)) Weight: 0.74 lbs. (335g) (without batteries and tape cassette) Power supply: Six AAA size alkaline batteries or optional AC adapter (model AD-30/AD-24) Tape cassette: Brother TZ tape 1/4" / 3/8" / 1/2" (width) (6mm, 9mm, 12mm (width)) Cutter unit: TC-5 (replacement) POWER SUPPLY & TAPE CASSETTES a Remove the back cover by pressing in the rough area at the top end of the machine and then flip away from the machine. If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are already installed, remove them. b-1 Insert the batteries into the battery compartment with the positive end of the bottom three batteries pointing away from the cutter lever, and the positive end of the top three batteries pointing toward the tape cutter lever. Always replace all six batteries at the same time using brand new ones. b-2 Insert a tape cassette, making sure that it snaps into place. • Make sure that the end of the tape feeds under the tape guides. • Be sure to remove the paper tab when installing a new tape cassette. • If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette. • Use only Brother TZ tapes with this machine. c Attach the back cover by inserting the two hooks at the bottom into the slots on the machine, then pushing down firmly on the cover until it snaps into place. After you have installed the tape, feed the tape (see FEEDING) once and then push in the tape cutter lever to cut the tape. Optional AC adapter (model AD-30/AD-24) a Insert the plug on the adapter cord into the adapter jack on the bottom end of the machine. b Plug the other end of the adapter to the nearest standard electrical outlet. Cutter unit (replacement) If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly, replace with new cutter unit (stock no. TC-5) by obtaining from an authorized brother dealer. Tape cutter lever Tape exit slot Print head Cutter unit KEYBOARD & LCD The LCD shows one row of 8 characters; however, the text that you enter can be up to 55 characters in length. Power On/Off Press a to turn the machine on and off. The machine automatically turns off if no key is pressed within 5 minutes. Print key Function key Enter key Backspace / Cancel key Caps key Space key LCD indicators Power key Cursor key Num keys/Function shortcuts Character keys Accent key Symbol key Function Style Upper case/Lower case Cursor Size Underline/Frame GETTING STARTED a Start your machine Supply power by using six AAA batteries or the optional AC adapter, and then press a. b Set the language (English/French/German) Choose a language with b and press e. Check the display and press e. (To cancel, press d.) c Set the unit (mm/inch) Choose a unit with b and press e. Check the display and press e. (To cancel, press d.) NOTE: • You can also display the languages and units by pressing the corresponding Num keys (1-3). • The available accented characters depend on the language setting. NOTE: • To cancel operations, press d. • To delete entries backward, press d. • To initialize the settings, turn off the machine and then while holding down f and d, press a to turn the machine back on. Finally, release f and d. MAKING TEXT Switching UPPER CASE/LOWER CASE " j Upper case Lower case Making A TWO LINE LABEL Move the cursor to where the second line starts and press e. NOTE: Use either 9 mm or 12 mm wide tape for two line labels. Display Label image Entering SYMBOLS " h > B > b > e NOTE: • You can also display the symbols by pressing h / b. • To go to the next group, press h. • To skip to a different group, press the corresponding character key of the group. • You can also scroll the symbols in each group by pressing the corresponding character key of the group repeatedly. Group Symbols Group Symbols A F B G C H D I E ABC abc ABC abc ABC DEF Entering ACCENTED CHARACTERS " g > E > b > e NOTE: • You can also display the characters by pressing g / b. • To go to the next letter group, press g. • To skip to a different letter group, press the corresponding character key. • You can also scroll the characters in each letter group by pressing the corresponding character key repeatedly. Letter Accented characters Letter Accented characters A a C c E e I i N n O o U u y DESIGNING LABELS Setting FONT (f+1) " f > f/b > e > f/b > e HELSINKI OKLAHOMA Setting SIZE (f+2) " f > f/b > e > f/b > e AUTO automatically adjusts the text s...
Este manual também é adequado para os modelos :Equipamentos de Loja - PT-1000/GL-100 (1.96 mb)