Assessments - 2, GPA: 3.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• If you erase the index on the message you set the alarm to play back, the alarm setting will be cancelled. • You can adjust the playback volume with the VOL control. • If the alarm time comes during erasing, alarm will sound for 10 seconds after the erasing is finished and playback begins. • Alarm setting will not be cancelled when the alarm playback finishes. To cancel alarm setting, see above. Other Functions 37GB Preventing Accidental Operation — HOLD function HOLD switch Slide the HOLD switch in the direction of the arrow. “HOLD” will flash three times, indicating that all the functions of the buttons are locked. To cancel the HOLD function, simply slide the HOLD switch in the opposite direction. Note When the HOLD function is activated during recording, cancel the HOLD function first to stop recording. 1 Tip Even if the HOLD function is activated, you can stop the alarm playback. To stop the alarm or playback, press xSTOP. 38GB Selecting the Display Mode You can select the display mode for the stop, recording and playback modes. (If the unit is left unoperated for more than 3 seconds in the stop mode, the display will show the current time, regardless of the display mode setting.) Each time you press DISPLAY, the display mode will change as shown below: DISPLAY Counter: Elapsed playback/ recording time in one message M Recorded time: The date and time the current message was recorded. (If the clock has not been set, “- -:- -” will be displayed.) Remaining recording time: The remaining recording Other Functions time is displayed “- -Y- -M- -D” will be displayed.) 39GB Menu map Press MENU to enter the menu mode. ALARM OFF ON MODE SP LP SAT Set date DATE SUN Set time MON TUE B-PLAY WED B-ONLY THU FRI TIMER DAILY ON DATE SUN BEEP ON OFF Set date Set start time Set end time SP LP MON TUE OFF WED CONT OFF THU FRI ON EASY-S OFF SAT ON DAILY SET DATE Year Month Day Hour Minute : Initial setting : Press NxPLAY/STOP to go to the next step. : Press . or > to select. 40GB Changing the Settings Follow the menu map on page 40. 1 Press MENU to enter the menu mode. 2 Press . or > to select the item and press Nx PLAY/STOP. 3 Press . or > to select the mode and press Nx PLAY/STOP to fix the setting. z Alarm setting (ALARM) See page 35. z Timer recording (TIMER) See page 32. z Recording mode (MODE) SP: You can record for up to 127 minutes with better sound. LP: You can record for up to 339 minutes. z Beep sound (BEEP) BEEP ON: A beep will sound to indicate that operation has been accepted. BEEP OFF: No beep sound will be heard except for the alarm and timer. zContinuous Play (CONT) CONT ON: You can play back all messages in a folder continuously. CONT OFF: Playback stops at the end of each message. z Easy search (EASY-S) EASY-S ON: You can go back for approx. 3 seconds with a press of the . button, or advance for approx. 10 seconds with a press of the > button. EASY-S OFF: You can go back to the beginning of the current message with a press of the . button , or advance to the beginning of the next message with a press of the > button. z Clock setting (SET DATE) See page 10. Other Functions 41GB B”Digital Voice Editor“ Software Operations What you can do with the “Digital Voice Editor” Software The Digital Voice Editor Software enables you to do the following: • Transferring the messages recorded on the IC recorder to your computer (page 51) You can transfer the messages to your computer and save them onto your computer’s hard disk (page 51). When saving the messages on your computer, you can select from four file types: “ICS file”, “MSV file”, “DVF file” and “WAV file” (page 53). Record messages on the IC recorder Transfer messages Your computer Save the messages to the computer as sound files dvf file ics file msv file wav file • Playing back the messages on the computer The messages in the IC recorder or your computer’s hard disk can be played back through your computer’s speakers. In addition to normal playback, you can enjoy various ways of playback, such as Repeat Play and A-B Repeat Play. • Adding sound files saved in the computer to your IC recorder and playing them back on the IC recorder (page 54) You can add the messages saved to the computer or sound files (DVF, MSV, ICS or WAV file) you received via e-mail to the IC recorder. You can add them one by one or all files in a folder at one time. 42GB The messages transferred from the computer can be played back on the IC recorder. Play back on the IC recorder Transfer sound files* Your computer • Messages transferred from the IC recorder • Sound files you received via e-mail, etc. *The sound files you can add to the IC recorder are DVF/ICS files recorded with a Sony IC Recorder, PCM 16/11/8kHz sampling, 8/16 bit monaural WAV files, and MSV files only. •Editing the messages recorded in the IC recorder or saved to the computer on the computer screen You can enjoy various editing functions; you can rename messages and their user names, divide/combine messages by ad...