To download the program, go to Date and time setup 1. Insert 2 AAA batteries in the player. 2. When YY shows, press H4/»M or VOL +/- to adjust the value (default year: 2009) and then press info/menu to confirm. 3. Repeat step 2 to set the "Month", "Date", "12/24 hour time", "Hour" and "Minute" 4. After the date and time are set, press HI to turn on the player and start using the player. For details on operating the player, please refer to the user manual. v1.0 (EN/E)

To download the program, go to Date and time setup 1. Insert 2 AAA batteries in the player. 2. When YY shows, press H4/»M or VOL +/- to adjust the value (default year: 2009) and then press info/menu to confirm. 3. Repeat step 2 to set the "Month", "Date", "12/24 hour time", "Hour" and "Minute" 4. After the date and time are set, press HI to turn on the player and start using the player. For details on operating the player, please refer to the user manual. v1.0 (EN/E)

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY from the headphone jack). To unlock, slide the / OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. player and then double-click the rcadvm7_setup.exe to launch the installer. Date and time setup switch to the middle (Towards the headphone jack). ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WAR-Visit to find 1. Insert 2 AAA batteries (included). Go to the player menu (to access Folders, Ed

Pressing No will discard the changes. The input volume can also be controlled during recording by using the Vol Up and Vol Down buttons. 10 Microboards CopyWriter Live CD Tools The CD Tools menu item allows you to close an open Audio CD. It also allows you to erase a CD-RW disc. Press Yes/Setup when you have selected the CD Tools entry on the Setup Menu. There are 3 options under the CD Tools menu: Close Disc In order for a recorded disc to play back correctly in other players, the disc must be

Recording Messages With your new voice recorder, you can record and store up to 199 messages. 1. Make sure the HOLD switch is in the off position. 2. Press REC/STOP, PLAY/STOP or REC MODE/ PAUSE to turn on the recorder. 3. Press RECORD MODE to select the recording speed. 4. Point the built-in microphone toward the sound source and press the REC button. 5. Press REC again to stop recording. Note: The message number, recorder status, and time appear in the display. Recording Speeds SP (Standard Mo

3/00. Trademarks) ® Registered Marca(s) Registrada(s) ©2000 Thomson Consumer Electronics, Inc. Photos and features subject to change without notice. Illustration of product finish may vary from actual color. Pub. No. S-35383 О THOMSON CONSUMER ELECTRONICS 10330 N. Meridian Street, Indianapolis, IN 46290-1024 Get more information on GE Consumer Electronics products at 2 www.ge-electronics.com

6. Press RECORD within 3 seconds to start recording appendix. 7. Press STOP to stop recording. 13 RP5030 EN (B ver) 15/11/06 10:28 AM Page 19 Cut You can erase unwanted parts from your recording. 1. Select folder. 2. Select file. 3. Start playback of the file with the unwanted part. 4. Press ERASE to mark the start of the unwanted part, SP ONE AM A “CUT-S” shows on display. 5. Press ERASE to mark the endof the unwanted part, “CUT-E” shows on display. SP ONE AM A 6. Press ERASE again to confirm c

• When external microphone is connected, no record can be made from built-in microphone. to unlock the keys. Tones You can activate this feature so that beep BEEP sound can be heard whenever you press on any button except during playback and recording. BEEP 1. Press MENU button repeatedly until TONE shows on display. 2. Press REVERSE or FORWARD to set beep sound ON/ OFF. 3. Press MENU to confirm selection. 5 RP5030 EN(A ver.) 7/3/06 4:56 PM Page 11 Setting the Time EN Year/Date/12/24/Time Settin

1. Select destination folder (A, B, C , D or ). 2. Press MENU four times. 3. Press REVERSE or FORWARD to toggle between AVR on and AVR off. 4. Press STOP to exit to STOP mode. 5. Press RECORD to enter AVR mode. AVR 6. During AVR on recording, adjust the sensitivity of the microphone by pressing VOL UP and VOL DOWN, SEN AVR with sensitivity value shows on display (e.g. increase sensitivity value when recording source is far from the unit or the recording envionment is quiet.). 7. Start dictation.

While playback is stopped, press Rec to start recording. Recording time will be displayed once you press the button. 2. To pause recording, press Rec once, press again to resume recording. 3. To stop recording, press STOP. AVR (Automatic Voice Recording) This feature allows the player to sense sound and to record only when you are speaking into the microphone. When dictation stops for about three seconds, recording will pause and then start again automatically when you resume dictation. 1. Selec