Log:
Assessments - 2, GPA: 4 ( )

Instruções de Operação Bunn, Modelo ICD-3S

Fabricante : Bunn
Arquivo Tamanho: 70.7 kb
Arquivo Nome : c1607b96-18b5-47fd-87ff-f145a2c4316e.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


The dispenser must be placed on a sturdy counter or shelf. NOTICE -In order to use this dispenser with a Bunn-O-Matic brewer, the guide rails on the base of the brewer will need to be removed, to allow for the width of the TDS-S/ICD-S dispenser. To retain the guide rails on the machine, order BUNN Guide Rail Extension Kit number 32033.0000. NOTE - The TDS-3S & ICD-3S dispensers weigh approximately 40 pounds when full. The TDS-5S weighs approximately 55 pounds when full. You must be careful when lifting these dispensers. WHEN THE DISPENSER IS HOLDING LIQUID,LIFT THE DISPENSER USING THE HANDLES ONLY. DO NOT LIFT THE DISPENSER FROM THE BOTTOM. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 33833.0000E 7/01 ©2001 Bunn-O-Matic Corporation DAILY CLEANING CAUTION -CLEAN AND SANITIZE YOUR DISPENSER DAILY 1. Thoroughly clean the inner surfaces of the dispenser using a mild cleaner/sanitizer and water solution then thoroughly rinse the dispenser with warm water. NOTE -Bunn-O-Matic recommends the use of KAY-5® for this purpose. (Kay-5 is a product of the Kay Chemical Company, Greensboro, NC) Simply pour the cleaner/sanitizer into an empty dispenser. Run a complete brew cycle of just water into the dispenser and let it set for a minute. Empty the dispenser and thoroughly rinse with warm water. 2. Remove the faucet handle/stem assembly by unscrewing the faucet bonnet just beneath the faucet handle. Use the enclosed cleaning brush to thoroughly clean the inside of the faucet and the faucet shank from inside the dispenser. 3. Disassemble the faucet/stem assembly. The faucet cleaning procedure requires a 3-compartment sink. Thoroughly wash all faucet parts in a mild detergent and water solution in the first sink. Rinse the parts in hot water in the second sink. Sanitize the parts for one minute in 75°F warm chlorine solution (at least 50 ppm) in the third sink. Do NOT use full-strength bleach, but a solution with water, of no more than 50 ppm of chlorine. Reassemble the faucet and attach it to the dispenser. 4. Wash the entire outside surface of the dispenser with a clean damp cloth. CAUTION -NEVER KEEP BREWED ICED BEVERAGES OVERNIGHT REPLACEMENT PARTS TDS-5S DISPENSERS TDS-3S & ICD-3S DISPENSERS 1. 03043.0002 Decal, Fresh Brewed Tea 1. 03043.0002 Decal, Fresh Brewed Tea 2. 00651.0000 Decal, Bunn 2. 21412.0001 Decal, Fresh Brewed Iced Coffee 3. 33843.0000 Decal, Cleaning & Sanitizing 3. 00651.0000 Decal, Bunn 4. 00674.0000 Faucet Cleaning Brush 4. 33843.0000 Decal, Cleaning & Sanitizing 5. 33829.0000 Lid, Molded 5. 00674.0000 Faucet Cleaning Brush 6. 03093.0002 Faucet Wing Nut 6. 33829.0000 Lid, Molded 7. 01221.0000 C-Ring, Faucet Shank 7. 03093.0002 Faucet Wing Nut 8. 03260.0001 Faucet Assy (Includes items 9 thru 13) 8. 01221.0000 C-Ring, Faucet Shank 9. 29163.0001 Faucet Handle, Black 9. 03260.0001 Faucet Assy (Includes items 10 10. 00601.0000 Faucet Spring thru 14) 11...

Este manual também é adequado para os modelos :
Dispensadores - TDS-3S (70.7 kb)
Dispensadores - TDS-5S (70.7 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias