Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
4 BOTTLE WINE COOLER/ PERSONAL FRIDGE Thank you for choosing a Soleus Air wine cooler. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new wine cooler. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below: Store Name: ____________________________________________________ Location: ______________________________________________________ Date Purchased: _________________________________________________ Serial Number (located on back of unit): ______________________________ WARNINGS When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1) Read all instructions before using this unit. 2) Do not clean your wine cooler with flammable fluids. The fumes can create a fire hazard or explosion. 3) Do not operate this or any appliance with a damaged cord. Connect to properly polarized outlets only. 4) Do not run cord over carpeting or other heat insulators. Do not cover cord. Keep cord away from high traffic areas, and do not submerge in water. 5) Unplug the wine cooler before cleaning or making repairs. NOTE: If for any reason this unit requires service, we strongly recommend that a certified technician perform the service. 6) Before switching between HOT and COLD modes, switch the wine cooler to OFF for at least 5 minutes. 7) Do not obstruct or block the backside of the unit. Keep at least 4 inches (10cm) from any surrounding objects for proper ventilation. 8) Do not operate the unit in direct sunlight. 9) Do not put ice or water inside the unit. 10) Unplug and clean the unit if not in use for an extended period of time. 11) When used in a car, the unit must be switched to OFF and unplugged if the car’s engine is turned off. Otherwise, you may drain your car battery. WARNING: This wine cooler is equipped with polarized plug (one blade is wider than the other). The plug is intended to fit into a power outlet only one way, with the wide blade in the wide slot. This is a safety feature; if you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG. Technical Specifications Voltage Rating 12V, 4A Power Consumption Cooling: 50W; Heating: 45W Temperature Range Cooling: 39-82°F; Heating: 86-126°F Volume 4 L Unit Size 13“(W) x 10”(D) x 16“(H) Unit Weight 10 lbs NOTE: For best results, leave out of direct sunlight. In the cooling mode, the wine cooler cools approximately 25°F (14°C) lower than the surrounding temperature. The heating function can keep the unit as warm as 126°F (52°C), but the temperature would be 2-3F higher than what you set to get the best heating result. NOTE: The wine cooler fits four traditional size bottles, capacity may differ depending on bottle size. Product Diagram A) Carrying Handle B) Control Panel C) Removable Shelf D) Double Paned Amber Tinted Door E) Door Handle F) Ventilation G) HOT/OFF/COLD Switch H) AC Adapter/ DC Power Cord Plug-in Includes 1 wine cooler, 1 flat shelf, 1 115V AC adapter, and 1 12V DC power cord Operating Instructions 1) Clean the inside of the wine cooler with a soft, damp cloth and mild detergent. 2) Set the HOT/OFF/COLD switch on back to OFF. 3) Connect the AC adapter to the back of the unit, and then plug the AC adapter into a grounded 115V 60Hz power outlet. Or, if using in a vehicle, connect the DC power cord to the back of the unit and then plug into any standard vehicle cigarette lighter socket. 4) HOT/OFF/COLD switch operation: a) When the switch is on COLD, the green light will turn on, indicating the unit is cooling. b) When the switch is on HOT, the red light will turn on, indicating the unit is heating. NOTE: When switching between COLD and HOT, set the unit at OFF for five minutes. 5) To set the temperature: a) For cooling, press COLD once. The temperature range is 39-82°F. However, the unit can only cool 25°F below the surrounding temperature. For heating, press HOT once. The temperature range is 86-126°F. b) When the temperature is blinking, press the up and down buttons to select the desired temperature. c) The display shows the current temperature. Once selected, the wine cooler will begin cooling/heating to the set temperature. 6) To change the display from Celsius to Fahrenheit, or Fahrenheit to Celsius, hold the up button for 2 seconds. 7) Unplug the wine cooler when not in use. Maintenance 1) Set the switch on back to OFF. Unplug the unit and let it cool completely. 2) To keep the wine cooler clean, the exterior may be cleaned with a soft, damp cloth. You may use a mild detergent if necessa...