Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Not for disclosure except under terms of a Non-Disclosure Agreement accepted by recipient and by an actually authorized agent of Digital Theater Systems, Inc. Unauthorized disclosure is a violation of State, Federal, and International laws. NOT FOR USE EXCEPT UNDER TERMS OF A VALIDLY EXECUTED WRITTEN LICENSE AGREEMENT BETWEEN INTENDED USER AND DIGITAL THEATER SYSTEMS, INC. Protected by one or more of the following U.S. Patents numbers 6,487,535; 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616 B1 and other international patents both pending and issued. Limited Warranty This software program is sold AS IS, with no warranties, expressed or implied. You assume the entire risk as to the selection, results and performance of the software program. Digital Theater Systems ( DTS ) warrants the diskette or CD-ROM on which the software is delivered to be free from defects in materials and workmanship from the date of purchase. DTS will replace, at its option and free of charge, any defective diskette or CD-ROM. You shall pay the cost of shipping the media to and from DTS. The warranty does not extend to any diskette that has been altered, misused or damaged for any reason. This warranty extends only to you as the original purchaser and is not transferable. This limited warranty constitutes your sole and exclusive remedy and the sole and exclusive liability of licenser and is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. In no case shall DTS be liable for special, incidental, consequential or indirect damages or for the loss or retrieval of data. This warranty gives you specific legal rights, and you may have other rights that vary from state to state. In no event shall DTS total liability to User for all damages, losses, and causes of action (whether in contract, tort - including negligence - or otherwise) exceed the amount paid by User for the Software. Copyright Info DTS Pro Series Surround Encoder Installation and User Manual Do Not Duplicate. Copyright ' 2004 Digital Theater Systems, Inc. Unauthorized duplication is a violation of State, Federal, and International laws. This publication is copyrighted and all rights are reserved by Digital Theater Systems, Inc. No part of this publication may be reproduced, photocopied, stored on a retrieval system, translated, or transmitted in any form or by any means, electronic or otherwise, without the express prior written permission of Digital Theater Systems, Inc. The content of this publication is subject to change without notice and does not represent a commitment on the part of Digital Theater Systems, Inc. Every effort has been made to ensure the accuracy of this publication. However, due to ongoing improvements and revisions, Digital Theater Systems, Inc. cannot guarantee the accuracy of printed material after date of publication nor can it accept responsibility for errors or omissions. Digital Theater Systems, Inc. will publish updates and revisions to this publication as needed. DTS and the DTS Digital Surround logo, and Neo:6 are trademarks of Digital Theater Systems, Inc. Document No. 9301E903001.2 October, 2004 Installation and User Manual – DTS Pro Series Surround Encoder Contents 1. INSTALLATION 1.1. PC Standalone Installation 1.2. Mac Standalone Installation 2. OVERVIEW 3. USING THE PRO PACKER 4. ENCODING IMMEDIATELY AFTER PACKING 5. USING THE ENCODER IN STANDALONE MODE 6. ENCRYPTING A FILE 6.1. Decrypting a File 7. DVD AUTHORING FOR DTS 8. UNINSTALLING THE SOFTWARE 9. DIALOG NORMALIZATION 1 DTS Pro Series Surround Encoder – Installation and User Manual 1. Installation 1.1 PC Standalone Installation System requirements ¦ PC computer, Pentium 4, 1GHz or higher (recommended) ¦ 256 MB RAM ¦ 1 hard drive, 7200 RPM minimum, 200 MB free disk space ¦ Greater than 20 GB disk space for audio files ¦ USB port for the license adapter key (dongle) ¦ Windows XP Home edition or XP Professional (SP1) Surround Encoder installation procedure The installation of the Surround Encoder software onto a PC computer is a simple process. Three software components will be installed ¦ An update to Java virtual machine (if needed) ¦ Runtime for the adapter key dongle (WIBU, a third party) ¦ DTS Pro Series Surround Encoder software, which includes the Pro Packer, Pro Encoder, and Pro Encrypter utility and libraries • Important: Proper privileges are required to install and uninstall Surround Encoder software, including the WIBU driver for the auto-detected adapter key (dongle). Instructions ! Caution: Do not install the adapter key (dongle) before the software has been installed. Install the adapter key into a USB port on your system after the software has completed installation. 1. Insert the CD-ROM (DTS #9311E90801) into the CD-ROM drive. The Installation process should start automatically. If it does not automatically start, then from the Start menu, select Run and Browse to the proper setup.ex...