Assessments - 2, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Even if multi-channel audio sources, such as DVD, Blu-ray disc, are played back, “ DIGITAL” or “DTS” is not displayed. • When using VIERA Link “HDAVI Control” and the speaker is set to “TV”, press VIERA Link button on the remote control of TV (VIERA) and set the speaker to “Home Cinema”. This system’s input automatically switches to “AUX2 / STB ”, but sound is not heard. Or unexpected sound from other equipment is heard. • After “Setting for automatically switching the input source to STB”, the connection might have been changed. Select OFF once and SET again. Speakers [WIRELESS LINK] indicator on the speakers does not light green. Sounds are interrupted. • When [WIRELESS LINK] indicator is off, check the connection of AC power supply cord of speaker and check the speaker is “ON”. • If [WIRELESS LINK] indicator does not change from red to green, the main unit and speaker are not linked. Make sure that the main unit is “ON”. Or make the speaker setting again. • You may be using wireless headphones or the wireless LAN may be operating near this system. These symptoms may be remedied by slightly moving this system’s position. Sound stops. (The indicator blinks red and green alternately.) The protection circuit is activated when some abnormality is detected, and turns off the system automatically. • Amplifier output is abnormal. • Straining of the speakers through excessive volume or power. • This may occur if you use the system in an extremely hot environment. ..Determine and correct the cause, then turn the system on. (The protection circuit is reset.) (Consult your dealer if the problem persists.) Pages 23 22 — — 18 10 12,13,15 13,15 — — — — .. Dolby Digital Blu-ray disc, DVD etc. Note • With HDMI connection, this system can play back multi-channel LPCM signals .. DTS with sampling frequencies of over 48 kHz and PCM signals of over 96 kHz in Blu-ray disc, DVD etc. addition to multi-channel LPCM of up to 48 kHz and PCM of up to 96 kHz. (If .. PCM (2-channel) frequency exceeds these figures, playback equipment performs down-sampling CD, DVD audio etc. and plays back as 48 kHz signals. However, playback may be impossible depending on the discs. See operating instructions of playback equipment for • Multi-channel LPCM (Linear PCM) more information.) Blu-ray disc, DVD audio etc. • With the optical fiber connection, this system can play multi-channel LPCM signals with sampling frequencies of up to 48 kHz and PCM signals of up to 96 kHz. • See “Glossary” (. page 28) for more detailed information on each signal. Maintenance Unplug the AC power supply cord from the household AC outlet and wipe the system using a soft and dry cloth. • When the system is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a dry cloth. • Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to come off. • Before using chemically treated cloth, read the instructions that come with the cloth carefully. 27 Troubleshooting RQT9471 Glossary 28 Troubleshooting andother information Glossary Analog Audio signals produced from L/R audio output terminals of general equipment is called analog audio. CPPM (Content Protection for Prerecorded Media) This is the copyright protection technology which prevents file copy of DVD audio. Decoder, Decode Decoder is the device to enable us to hear audio data that is encoded on DVD, etc., as a normal audio signal. This process is called Decode. Deep Color This system can reproduce greater color gradation (4096 steps) when connected to compatible TV and recorder, etc. You can enjoy exceptionally rich, natural-looking colors, with smooth, detailed gradation and minimal color banding. Digital Blu-ray Disc players, DVD recorders, DVD players, and CD players are usually equipped with digital output terminals. Connect through the digital terminal to enjoy digital surround sounds such as Dolby Digital and DTS. Dolby Digital Digital sound compression technology developed by Dolby Laboratories. Compatible with surround sound as well as 2-channel stereo sound. With this technology, you can keep massive amount of audio data in a disc effi ciently. Dolby Pro Logic This system can process not only Dolby Surround, but also other 2-channel sources to produce a 5.1-channel sound for a more realistic sound field. It is also possible to enhance old movies recorded in stereo with this dynamic 5.1-channel sound. This system uses Dolby Pro Logic to add surround effects to stereo sources such as video cassettes and CDs. Dolby Virtual Speaker This system allows you to enjoy a surround effect with two front speakers. This is not merely a “virtual surround” effect, but rather uses the optimal speaker arrangements and listening positions for 5.1-channel sound. Down-sampling This is the process of resampling by reducing the sampling rate of a signal that was sampled at a certain rate. DTS (Digital Theater Systems) Surround system used ...