Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
by changing the information in the display. Press DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows. Index name of the input* t Selected input t Sound field currently applied When the tuner is selected Program Service name** or preset station name* t Frequency t Program Type indication** t Radio Text indication** t Current Time indication (in 24-hour system)** t Sound field currently applied * Index name appears only when you have assigned one to the input or preset station (page 32). Index name does not appear when only blank spaces have been entered, or it is the same as the input name. ** During RDS reception only. (Models of area code CEL, CEK only. See page 21.) Adjusting the brightness of the display Press DIMMER repeatedly. The brightness of the display will change in 3 steps. Amplifier Operation 23GB About the indications in the display 8qaqs9q; 2143567 A SW: Lights up when audio signal is output from the SUB WOOFER jack. B LFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. C SP: Lights up when you turn on the receiver. Turns off when you connect headphones to the PHONES jack. D ; DIGITAL: Lights up when the receiver is decoding signals recorded in the Dolby Digital format. E ; PRO LOGIC II: “; PRO LOGIC” lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. “; PRO LOGIC II” lights up when the Pro Logic II Movie/Music decoder is activated. F DTS: Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 28). G Tuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 19–22 for tuner operations. Note “RDS” appears for models of area code CEL, CEK only. H D.RANGE: Lights up when dynamic range compression is activated (page 29). I COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal. J OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal. K SLEEP: Lights up when sleep timer is activated. L Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound. L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing)) Example: Recording format (Front /Surround): 3/2 Sound Field: A.F.D. AUTO L C R SL SR 24GB Enjoying Surround Sound Using only the front speakers and sub woofer — 2CH STEREO In this mode, the receiver outputs the sound from the front left/right speakers and sub woofer. When multi channel surround formats are input, the signals are downmixed to 2 channel with bass frequencies being output from the sub woofer. When standard 2 channel stereo sources are input, the receiver’s bass redirection circuitry will be activated. The front channel bass frequencies will be output from the sub woofer. Press 2CH. “2CH ST.” appears in the display and the receiver switches to the 2CH STEREO mode. Enjoying higher fidelity sound — AUTO FORMAT DIRECT The Auto Format Direct (A.F.D.) mode allows you to select the decoding mode you want for your audio sound. A.F.D. mode Decoding mode (Display) A.F.D. AUTO As encoded (A.F.D. AUTO) PRO LOGIC Dolby Pro Logic (DOLBY PL) PRO LOGIC II MOVIE Dolby Pro Logic II (PLII MV) PRO LOGIC II MUSIC (PLII MS) MULTI STEREO (MULTI ST.) Decoding the input audio signal automatically In this mode, the receiver automatically detects the type of audio signal being input (Dolby Digital, DTS, standard 2 channel stereo, etc.) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/ encoded, without adding any surround effects. However, if there are no low frequency signals (Dolby Digital LFE, etc.) it will generate a low frequency signal for output to the sub woofer. Press A.F.D. repeatedly to select “A.F.D. AUTO”. The receiver automatically detects the type of audio signal being input and performs the proper decoding if necessary. Enjoying Surround Sound continued 25GB Enjoying stereo sound in multi channel (2 channel decoding mode) This mode lets you specify the type of decoding for 2 channel audio sources. This receiver can reproduce 2 channel sound in 5 channels through Dolby Pro Logic II; or 4 channels through Dolby Pro Logic. Press A.F.D. repeatedly to select the 2 channel decoding mode. The selected type of decoding appears in the display. x DOLBY PL (PRO LOGIC) Performs Dolby Pro Logic decoding. The source recorded in 2 channel is decoded into 4.1 channels. x PLII MV (PRO LOGIC II MOVIE) Performs Dolby Pro Logic II Movie mode decoding. This setting is...