Assessments - 2, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Home theater - HT-DDW880 (511.78 kb)
Home theater - HT-DDW880 (5.19 mb)
Facilidade de uso
(Also starts recording with components in recording standby.) Y m/M Press to - search tracks in the forward/ backward direction of the CD player, VCD player, DVD player, LD player, MD deck, Blu-ray disc recorder, hard disc recorder, or PSX. - fast forward/rewind of the VCR, DAT deck, or tape deck. D. TUNING Press to enter direct tuning mode. ANT Press ALT (G) and then press ANT to select the signal to be output from the antenna terminal of the VCR or satellite tuner (TV signal or video signal). CLEAR Press ALT (G) and then press CLEAR to - clear a mistake when you press the incorrect numeric button. - return to continuous playback, etc. of the CD player, DVD player, Blu-ray disc recorder, PSX, or satellite tuner. Name Function Z TUNING +/- Press to scan a station. Press to skip tracks of the VCR, CD player, VCD player, LD player, DVD player, MD deck, DAT deck, tape deck, Blu-ray disc recorder, hard disc recorder, or PSX. 2CH Press to select 2CH STEREO mode. A.F.D. Press to select A.F.D. mode. MOVIE Press to select sound fields (MOVIE). DUAL MONO Press to select the language you want during digital broadcast. AUDIO Press to change the sound to Multiplex, Bilingual or Multi channel TV sound of the TV, VCR, DVD player, satellite tuner, Blu-ray disc recorder, hard disc recorder, or PSX. ANGLE Press to select the viewing angle or change the angles of the DVD player or Blu-ray disc recorder. JUMP/TIME Press to - toggle between the previous and the current channels of the satellite tuner, TV, or Blu-ray disc recorder. - show the time or display the playing time of a disc, etc. of the CD player, MD deck, VCD player, or DVD player. MEMORY Press MEMORY to store a station. SUBTITLE Press ALT (G) and then press SUBTITLE to change the subtitles of the DVD player. ENTER Press ALT (G) and then press ENTER to enter the value after selecting a channel, disc or track using the numeric buttons. 12GB Name Function Name Function Numeric Press ALT (G) and then press buttons the numeric buttons to - preset/tune to preset stations. - select track numbers of the CD player, VCD player, LD player, DVD player, MD deck, DAT deck, or tape deck. Press 0/10 to select track number 10. - select channel numbers of the TV, VCR, satellite tuner, Blu-ray disc recorder, hard disc recorder, or PSX. >10/11 Press ALT (G) and then press >10/11 to select track numbers over 10 of the CD player, VCD player, LD player, MD deck, tape deck, TV, VCR, Blu-ray disc recorder, hard disc recorder, PSX, or satellite tuner. Wj Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can program the remote to control non-Sony components following the steps in “Programming the remote” on page 66. Button Assigned Sony component VIDEO1 VCR (VTR mode 3) VIDEO2 VCR (VTR mode 1) VIDEO3 VCR (VTR mode 2) DVD DVD player MD/TAPE MD deck SA-CD/CD Super Audio CD/CD player TUNER Built-in tuner AUX* Not assigned * The AUX button is not available for receiver operation. Wk TV 1/1 Press to turn the TV on or off. H RM SET UP Press to set up the remote. a)The MASTER VOL +, TV VOL +, TV CH + and buttons have tactile dots. Use the tactile dots as references when operating the receiver. Notes • Some functions explained in this section may not work depending on the model. • The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described. • The AUX and 12 buttons on the remote are not available for receiver operation. ißfis Getting Started 1: Installing speakers This receiver allows you to use a 6.1 channel system (6 speakers and one sub woofer). To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel). You can enjoy high fidelity reproduction of DVD software recorded sound in the Surround EX format if you connect one additional surround back speaker (6.1 channel) (see “Using the surround back decoding mode” on page 44). Example of a 6.1 channel speaker system configuration Tip Since the sub woofer does not emit highly directional signals, you can place it wherever you want. Installing the speakers on a flat surface Before you install the speakers and sub woofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. Installing the speakers on the speaker stand For greater flexibility in positioning the speakers, use the optional WS-FV11 speaker stand (available only in certain countries). For details, refer to the operating instructions supplied with the speaker stand. 0Front speaker(L) B Front speaker (R) 0 Center speaker TO Surround speaker (L) E Surround speaker (R) Q Surr...